HPE Community
Operating System - HP-UX
1825780 Members
2021 Online
109687 Solutions
New Discussion

remote printer prints half lables instead of 4x13 printing 4x6, queue is on hp-ux 10.20

 
vaman
Frequent Advisor

‎12-08-2004 08:16 AM

‎12-08-2004 08:16 AM

remote printer prints half lables instead of 4x13 printing 4x6, queue is on hp-ux 10.20

the remote printer is printing 1/2 lables, the size should be 4x13 but it is printing 4x6, printer is a network printer, with intermake &barcode printer.
Is it a hardware problem or problem from application side. host side q seems ok
vaman kulkarni
0 Kudos
Reply
1 REPLY 1
A. Clay Stephenson
Acclaimed Contributor

‎12-08-2004 08:25 AM

‎12-08-2004 08:25 AM

Re: remote printer prints half lables instead of 4x13 printing 4x6, queue is on hp-ux 10.20

I suppose that you meant Intermec. This is really an application setup problem made worse because it is a remote printer (as opposed to a Network/HP JetDirect) printer. You have very limited control over remote printer so everything must be done by the application.
If it ain't broke, I can fix that.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.