Remote printing in HP-UX 10.20

[Pepe Jimenez Muñoz]

Hi all,
I have 3 HP-UX machines, K260/3, D270/2 and D320, I have a Jetdirect printer configured in the K machine.

In D machines I configure the printer like remote printer in K machine and when I send something to the printer I get the next message:

D/320 # lpstat ljinf1
ljinf1-0 root prioridad 0 29 Mar 13:57 en ljinf1
(entrada est?ndar) 1739 bytes
ljinf1-1 root prioridad 0 30 Mar 08:08
(entrada est?ndar) 1739 bytes

printer queue for ljinf1

D320: waiting for 10.72.0.3 to come up

*****

10.72.0.3 is the K260/3?s IP.

I have a Linux machine in my network and this procedure works fine.

Thanks to all.

[Steven Sim Kok Leong]

Hi,

Perform the following from your D-classes:

# telnet 10.72.0.3 515

Does the connection get established? TCP/515 is the printer service port. This is to check if the printer service port is listening for new print requests.

Hope this helps. Regards.

Steven Sim Kok Leong
Brainbench MVP for Unix Admin
http://www.brainbench.com

[Philip Chan_1]

Have you enable the spooler in the "D" class machine? run SAM to check that.

~Philip

[Vincenzo Restuccia]

Enable spooler with:
# enable ljinf1