Restoring vPar Ignite image from an Ignite Server

[John E. Goetz]

How do I restore a vPar from and Ignite Server running C.7.3.148?

[Torsten.]

Just initiate a vPar boot from the ignite server. Commands are different for PA-RISC and Integrity systems - what do you have?

[John E. Goetz]

PA-RISC. Also the Ignite server is not a vpar.

[Torsten. · Accepted solution]

From the guide:

"...
For our example, if the target partition is winona2, we would execute the following command from winona1:
# vparboot -p winona2 -I ww.xx.yy.zz,/opt/ignite/boot/Rel_B.11.11/WINSTALL
..."

[IT_2007]

Logon to any vpar on that Npar and then issue the command. But you need to create before you initiate restore.

vpar1:\> vparboot -p vpar2 -I ,/opt/ignite/bin/WINSTALL

If you don't have any vpar's created then you may be creating 1st vpar?

[John E. Goetz]

Thank You