Restricted Sam access by Group

[Chaz Emery]

I am trying to setup Restricted SAM access for a specific group. I was able to setup Restricted Sam access that works for indivdual users, but I have not gotten it to work for a group.

I created the template using the Restricted SAM builder, "sam -r" selecting the group option, and applying granting the privileges to the desired group, NCSOPS. The users that I tested it with had the desired group as their Primary group. On attmepting to run sam as that user, I get the error to the effect of: You must be super user to run sam.

[Victor Fridyev]

Hi,

Run sam -r and choose "group" after choosing the required template.
The window there is on the top of the screen

HTH

[Chaz Emery]

Thanks for you time, I was able to fix my template, it turned out to be the issue of Primary vs Secondary group membership. The group with Restricted Privileges must be the user's primary group.

[Chaz Emery]

Aside from that, you are correct, run "sam -r" and choose "group".

Thanks again. - Cheers!