rootsh for HP-UX 11.11

[Ken O'Neil]

I'm having some difficulty getting rootsh compiled on HP-UX 11. (see other thread in the languages section) Does anyone know where I might find a pre-compiled binary of rootsh 1.5.2?

I've already looked through the Porting and Archive center as well as Merijn's software site but haven't been able to locate one. Any help would be appreciated.

[Devender Khatana]

Hi,

Have a look at these links.

http://freshmeat.net/projects/rootsh/?branch_id=52087&release_id=191500

http://prdownloads.sourceforge.net/rootsh/rootsh-1.5.2.tar.gz?use_mirror=kent

HTH,
Devender

[Ken O'Neil]

Those links are for the source code only; I was looking for a site like the Porting and Archive Centre for HP-UX (http://hpux.connect.org.uk/) that might have a pre-compiled binary for 11.11.

[Rick Garland]

I find no binary/depot files - only source.

Are you compiling with gcc or HP's aCC?
Try switching to the other compiler if you can.

[Ermin Borovac · Accepted solution]

What's the error you are getting when you try to compile it?

I'm looking at your previous thread

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=945597

but can't see any errors. There are some warnings, however, they are pretty normal and not very significant.

[Ken O'Neil]

"but can't see any errors. There are some warnings, however, they are pretty normal and not very significant."

That was really all I was asking in that other thread, were those errors/warnings of any significance that I should be concerned with?
I just thought it would be a good idea to check with the forum.

Thanks for your response.

[Rick Garland]

I found a rootsh depot binary for HPUX at
http://sourceforge.net/project/showfiles.php?group_id=110309&package_id=125148

[Ken O'Neil]

Thanks Rick. I had corresponded with Gerhard about this after I posted and I believe he put that up there in response.

Thanks again though for the heads up.