rp2470 couldn't install 11.0

[Ravi_8]

Hi guys

I have a strange problem here.
a rp2470 m/c running 11i on one disk. on another disk i need to have 11.0. started my ignite server to install, everything went fine. while kernel build and rebooting system crashes, couldn't boot in 11.0.
I tried installing from installable media(core OS CD), on the console i get "couldn't initialize" error. what could be the problem.

11i(on another disk) is working fine.

thanx in advance

[Stefan Farrelly]

There was a problem with some of the 11.0 install CD's - try another one.

[Ravi_8]

Hi,

I tried with several OS media. no result

[T G Manikandan]

Ravi,
How are you doing then?

I have the same server running with 11.0

1.GSP A firmware 01.10 version
2.PDC firmware 41.18 version


and ofsource the CD's are not bad and they are for 800 series.

REvert

[Ravi_8]

Hi TG

I am doing fine,lots of work. i am not finding time to look into ITRC nowdays, whenever i get little time i just peep in.
my email id has been changed. it's ravkumar@in.ibm.com

for this problem
firmware version 42.19
this m/c was recently bought (in may)

I tried with my older OS CD( june 2001) still getting the same error (strange)

[Helen French]

May be the latest firmware 43.24 will resolve the issue:

http://www2.itrc.hp.com/service/cki/patchDocDisplay.do?patchId=PF_CHAW4324

Read the special instructions before you install this.