RP3410 & MSA 30 with ULTRA 320 SCSI Card

[AIMC]

Hi,

I am attaching an MSA 30 to an rp3410 on a dual port ultra 320 scsi card but cannot see the 8 disks in the MSA, see ioscan below. Any ideas on what the problem could be? I can see as far as the MSA controller down 1 path but no disks & nothing on the other. Also the card uses a new mpt driver /dev/mpt4 & /dev/mpt5, any config on the driver needed?


# ioscan -fnk |more
Class I H/W Path Driver S/W State H/W Type Description
=============================================================================
root 0 root CLAIMED BUS_NEXUS
ioa 0 0 sba CLAIMED BUS_NEXUS System Bus Adap
ter (880)
ba 0 0/0 lba CLAIMED BUS_NEXUS Local PCI-X Bus
Adapter (783)
usb 0 0/0/1/0 hcd CLAIMED INTERFACE NEC USB Interfa
ce
usbhub 0 0/0/1/0.1 hub CLAIMED DEVICE USB Root Hub
usb 1 0/0/1/1 hcd CLAIMED INTERFACE NEC USB Interfa
ce
usbhub 1 0/0/1/1.1 hub CLAIMED DEVICE USB Root Hub
/dev/hub
usb 2 0/0/1/2 ehci CLAIMED INTERFACE NEC USB Interfa
ce
sideba 0 0/0/2/0 side_ba CLAIMED INTERFACE CMD IDE control
ler
ext_bus 0 0/0/2/0.0 side CLAIMED INTERFACE IDE Primary Cha
nnel
target 0 0/0/2/0.0.0 tgt CLAIMED DEVICE
disk 0 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-
N
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
target 1 0/0/2/0.0.7 tgt CLAIMED DEVICE
ctl 0 0/0/2/0.0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
ext_bus 1 0/0/2/0.1 side CLAIMED INTERFACE IDE Secondary C
hannel
target 2 0/0/2/0.1.7 tgt CLAIMED DEVICE
ctl 1 0/0/2/0.1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c1t7d0
ba 1 0/1 lba CLAIMED BUS_NEXUS Local PCI-X Bus
Adapter (783)
ext_bus 2 0/1/1/0 c8xx CLAIMED INTERFACE SCSI C1010 Ultr
a160 Wide LVD
target 3 0/1/1/0.0 tgt CLAIMED DEVICE
disk 1 0/1/1/0.0.0 sdisk CLAIMED DEVICE HP 36.4GMAX3036
NC
/dev/dsk/c2t0d0 /dev/rdsk/c2t0d0
target 4 0/1/1/0.1 tgt CLAIMED DEVICE
disk 2 0/1/1/0.1.0 sdisk CLAIMED DEVICE HP 36.4GMAX3036
NC
/dev/dsk/c2t1d0 /dev/rdsk/c2t1d0
target 5 0/1/1/0.7 tgt CLAIMED DEVICE
ctl 2 0/1/1/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c2t7d0
a160 Wide LVD
target 6 0/1/1/1.7 tgt CLAIMED DEVICE
ctl 3 0/1/1/1.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c3t7d0
lan 0 0/1/2/0 igelan CLAIMED INTERFACE HP PCI 1000Base
-T Core
ba 2 0/2 lba CLAIMED BUS_NEXUS Local PCI-X Bus
Adapter (783)
ba 3 0/3 lba CLAIMED BUS_NEXUS Local PCI-X Bus
Adapter (783)
graphics 0 0/3/1/0 graph3 CLAIMED INTERFACE PCI Display (10
3c108b)
ba 4 0/4 lba CLAIMED BUS_NEXUS Local PCI-X Bus
Adapter (783)
ext_bus 4 0/4/1/0 mpt CLAIMED INTERFACE SCSI Ultra320 A
6961-60011
/dev/mpt4
target 7 0/4/1/0.7 tgt CLAIMED DEVICE
ctl 4 0/4/1/0.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c4t7d0
ext_bus 5 0/4/1/1 mpt CLAIMED INTERFACE SCSI Ultra320 A
6961-60011
/dev/mpt5
target 8 0/4/1/1.6 tgt CLAIMED DEVICE
ctl 7 0/4/1/1.6.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c5t6d0
target 9 0/4/1/1.15 tgt CLAIMED DEVICE
ctl 6 0/4/1/1.15.0 sctl CLAIMED DEVICE COMPAQ PROLIAN
T 4L7E*DB
/dev/rscsi/c5t15d0
ba 5 0/6 lba CLAIMED BUS_NEXUS Local PCI-X Bus
Adapter (783)
ba 6 0/7 lba CLAIMED BUS_NEXUS Local PCI-X Bus
Adapter (783)
tty 0 0/7/1/0 asio0 CLAIMED INTERFACE PCI SimpleComm
(103c1290)
/dev/diag/mux0 /dev/mux0 /dev/tty0p0
tty 1 0/7/1/1 asio0 CLAIMED INTERFACE PCI Serial (103
c1048)
/dev/GSPdiag1 /dev/mux1 /dev/tty1p2
/dev/diag/mux1 /dev/tty1p0 /dev/tty1p4
unknown -1 0/7/2/0 UNCLAIMED UNKNOWN PCI Display (10
025159)
memory 0 8 memory CLAIMED MEMORY Memory
ipmi 0 16 ipmi CLAIMED INTERFACE IPMI Controller
/dev/ipmi
processor 0 128 processor CLAIMED PROCESSOR Processor


Thanks!

Aidan

[AIMC]

Easier to read ioscan attached!

[Dean Johnson_10]

Hi Adrian - I had a similar issue and found this ....

HP Dual port SCSI Addaptors

1. For more detailed information on installed A7173A adapter(s), including the SCSI parameter settings as well as verification of devices that have been connected to the A7173A adapter(s), issue the mptconfig command for each channel of each A7173A adapter. Use the device files displayed in the ioscan -fnkd mpt output.
Eg mptconfig /dev/mpt4

NOTE - When attaching an MSA30 to A7173A, ensure the server is powered off and on otherwise the disks will not be seen in ioscan !!!

Hope this helps

Regards

Dean