Run Glance Plus over firewall

[james_117]

I'm having problem running Glance Plus to monitor systems over firewall. Does anyone have some guideline or know where I can find manual to configure system with firewall?
Any idea is appreciated.

[Michael Tully]

Hi,

You can find the on-line manuals for openview products starting from this link. Select the product and version and a way you go.

HTH
Michael

http://ovweb.external.hp.com/lpe/doc_serv/

[Bill Hassell]

Glance is just a simple character mode application so if you can telnet to the systems, then Glance will run just fine with no special configuration. If you can't telnet to the systems, you'll need to work with your network admin concerning the firewall. Glance looks best and is easiest to navigate when displayed on an HP terminal (softkeys, video enhancements).

Now if you need to use gpm, the Xwindow version of Glance, that will be much more complicated due to the risks associated with running Xwindows through the firewall. You'll need to look at specialized encryption techniques to work with Xwindows.