rx4640(11.31) and MSA30

[mark.M]

Hi.
i'm install hp-ux 11v3(11.31) on rx4640.
Now SA6402 is connect MSA30(SCSI).
but "not found physical disk" error.
saconfig /dev/ciss4 is display ok.

installed follow.
RAID SA; Supptd HW=A7143A/A9890A/A9891A

spedb[/opt/raidsa/bin]# saconfig /dev/ciss6

******************** SmartArray RAID Controller /dev/ciss6 ********************

Auto-Fail Missing Disks at Boot = disabled
Cache Configuration Status = cache NOT configured
Cache Ratio = N/A

---------- PHYSICAL DRIVES ----------




Searching for devices
Scsi(Pun0,Lun0) HP 146 GST3146854LC HPC3 (320 MBytes/sec)
Scsi(Pun1,Lun0) HP 146 GST3146855LC HPC8 (320 MBytes/sec)
HP Smart Array 6400-128 Controller (version 2.74) 0 Logical Drives
1775-Drive Array - Storage Enclosure Not Responding
SCSI Port 1: Check storage enclosure power switch and cables.
Turn system power OFF, check ProLiant power and cable connections,
then turn system power back ON to retry. If you still see the message
and have Integrity Internal Storage, ignore the message and resume.
1785-Drive Array Not Configured
No Drives Detected


Press "F1" to continue...

[Torsten.]

Did you check these points?
Did you connect the drives to the (correct) controller?