SAM error

[Kenneth Woolard]

sam: FATAL ERROR: Unable to load library "/usr/obam/lib/libIDMawrt.1": Not enough space


Anyone come acroos this error when trying to start up SAM ?

[Dennis Handly]

This most likely means you are short of swapspace. What does "swapinfo -tam" show when you try to start sam?

[Kenneth Woolard]

Strange, SAM now working.

vuh607 $ swapinfo -tam
Mb Mb Mb PCT START/ Mb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 400 0 400 0% 0 - 1 /dev/vg00/lvol2
dev 8192 0 7600 0% 0 - 0 /dev/vg00/lvswap1
reserve - 5093 -5093
memory 11947 1409 10538 12%
total 20539 6502 13445 32% - 0 -

There is an application running on this server that does consume large amounts of system resource. Could be at the time I tried tostart SAM it was hogging a lot of the swap space

[Dennis Handly]

>Could be at the time I tried to start SAM it was hogging a lot of the swap space?

Exactly.

[Suraj K Sankari]

Hi,

Did you tried into console, if not try it there if still not opening then kill some process which is taking more memory and which is not that much important
Suraj

[Sandeep_Chaudhary]

This is swap space issue/ shared memory issue

Look in to:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=184401

[Sandeep_Chaudhary]

Please read the text file. It will help u
It gives u detail idea. This i got from one of the forum

[Sandeep_Chaudhary]

sorry couldnt attach file. sending link

ftp://hprc.external.hp.com/memory.htm#examples

go to the bottom part and check for "Not enough space" error

[Steven E. Protter]

Shalom,

bdf /var

You need a few hundred megabytes free space there for normal system operations and backups.

SEP

[SKR_1]

You can verify the situation at the same time when your application will run again, try again to run the SAM. If you will face any problem again for opening SAM.

Then go for some checks.

swapinfo -tam
top/glance
dmesg
Default vg00 FS utilisation ( /var, /tmp ) Extend these if they dont have enough space on the system

Thanks

SKR