SAM is throwing error

[Suman Patra]

Hi,

When I am typing sam from terminal, it is throwing the error " A SAM internal error has occured. Check the SAM log file using the Options menu or the /usr/sam/bin/samlog_viewer command for more details on the failure. contact an HP support representative and provide them with the contents of the log file (/var/sam/log/samlog) so that an appropriate resolution to this problem can be provided.

Here I am attaching the log (/var/sam/log/samlog)

_______________________________________________

@!@1@1161018505@0
samreg: Begin SAM registration of /opt/resmon/bin
@!@2@1161018505@0
samreg: Adding /opt/resmon/bin to /etc/sam/reg_dirs.db
@!@1@1161018505@0
samreg: /opt/resmon/bin successfully registered in SAM databases.
@!@1@1161018511@0
samreg: Begin SAM unregistration of /usr/sam/lib/atm
@!@32@1161018511@0
An attempt to unregister the file "/usr/sam/lib/atm/atm.tm" from the SAM regi
stration database failed because that file was not in the database.
@!@32@1161018511@0
An attempt to unregister the file "/usr/sam/lib/atm/atm.da" from the SAM regi
stration database failed because that file was not in the database.
@!@1@1161018511@0
samreg: /usr/sam/lib/atm successfully unregistered from SAM databases.
@!@1@1161018511@0
samreg: Begin SAM registration of /usr/sam/lib/atm
@!@2@1161018511@0
samreg: Adding /usr/sam/lib to /etc/sam/reg_dirs.db
@!@4@1161018511@0
Adding task "atm_get_hpux_revision" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_revision_number" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_card_speed" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_add_ip_host" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_del_ip_host" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_lecs_addr" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_wk_lecs_addr" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_pvc" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_svc" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_add_svc_config" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_del_svc_config" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_del_pvc_config" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_check_pvc_range" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_coherence_card_num" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_add_pvc_config" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_put_card_num" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_extract_resources" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_is_needed_to_boot" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_is_prilec_on_sec_card" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_if_exist_interface" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_resource_lec" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_put_resource_lec" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_remove_resource_lec" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_is_there_udr" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_check_monitor_is_running" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_class_ha_cards" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_extract_shapers" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_shapers" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_netprefix" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_varconf" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_put_varconf" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_mac_address" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_status_card" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_config_file" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_default_config_file_155_gsc" to the SAM registration dat
a base.
@!@4@1161018511@0
Adding task "atm_get_default_config_file_155_nio" to the SAM registration dat
a base.
@!@4@1161018511@0
Adding task "atm_get_default_config_file_155_gsc_plus" to the SAM registratio
n data base.
@!@4@1161018511@0
Adding task "atm_get_default_config_file_622_gsc_plus" to the SAM registratio
n data base.
@!@4@1161018511@0
Adding task "atm_put_config_file" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_put_config_file_el" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_update_sec_lec" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_update_sec_svcs" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_put_config_file_el_bk" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_put_config_file_ip" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_default_svc_config" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_natives_svc_config" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_get_default_pvc_config_nio_gsc" to the SAM registration data
base.
@!@4@1161018511@0
Adding task "atm_get_default_pvc_config_155_gsc_plus" to the SAM registration
data base.
@!@4@1161018511@0
Adding task "atm_get_default_pvc_config_622_gsc_plus" to the SAM registration
data base.
@!@4@1161018511@0
Adding task "atm_unconfigure_atm_card" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_enable_atm_if" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_disable_atm_if" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_remove_atm_if" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_stop_atm_card" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_start_atmcard" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_delete_line" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_add_line" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_plugged_cards" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_check_if_initialized" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_initialize_subsystem" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_check_atmconf_file" to the SAM registration data base.
@!@4@1161018511@0
Adding task "atm_check_atmcards" to the SAM registration data base.
@!@4@1161018512@0
Adding class "HP_ATM_CARD" to the SAM class registration database."
@!@4@1161018512@0
Adding class "HP_ATM_IF" to the SAM class registration database."
@!@4@1161018512@0
Adding class "ATM_VC_CONFIG" to the SAM class registration database."
@!@4@1161018512@0
Adding class "ATMUPDATEFILES" to the SAM class registration database."
@!@2@1161018512@0
samreg: Adding /usr/sam/lib/atm to /etc/sam/reg_dirs.db
@!@1@1161018512@0
samreg: /usr/sam/lib/atm successfully registered in SAM databases.
@!@1@1161018533@0
samreg: Begin SAM unregistration of /usr/sam/lib/clic
@!@32@1161018533@0
An attempt to unregister the file "/usr/sam/lib/clic/clic.tm" from the SAM re
gistration database failed because that file was not in the database.
@!@32@1161018533@0
An attempt to unregister the file "/usr/sam/lib/clic/clic.da" from the SAM re
gistration database failed because that file was not in the database.
@!@1@1161018533@0
samreg: /usr/sam/lib/clic successfully unregistered from SAM databases.
@!@1@1161018533@0
samreg: Begin SAM registration of /usr/sam/lib/clic
@!@2@1161018533@0
samreg: Adding /usr/sam/lib to /etc/sam/reg_dirs.db
@!@4@1161018533@0
Adding task "clic_adapter_get_list" to the SAM registration data base.
@!@4@1161018533@0
Adding task "clic_adapter_read_global_conf_file" to the SAM registration data
base.
@!@4@1161018533@0
Adding task "clic_adapter_read_init_var_array" to the SAM registration data b
ase.
@!@4@1161018533@0
Adding task "clic_adapter_update_conf_entry" to the SAM registration data bas
e.
@!@4@1161018533@0
Adding task "clic_check_running" to the SAM registration data base.
@!@4@1161018533@0
Adding task "clic_get_max_netconf_index" to the SAM registration data base.
@!@4@1161018533@0
Adding task "clic_kill_daemon" to the SAM registration data base.
@!@4@1161018533@0
Adding task "clic_check_suspension" to the SAM registration data base.
@!@4@1161018533@0
Adding task "clic_start_hf" to the SAM registration data base.
@!@4@1161018533@0
Adding task "clic_ifconfig_up_all_hf_nics" to the SAM registration data base.
@!@4@1161018533@0
Adding task "clic_ifconfig_up_ola_hf_nics" to the SAM registration data base.
@!@4@1161018533@0
Adding task "clic_ifconfig_down_all_hf_nics" to the SAM registration data bas
e.
@!@4@1161018533@0
Adding task "clic_switch_get_list" to the SAM registration data base.
@!@4@1161018533@0
Adding task "clic_switch_read_init_var_array" to the SAM registration data ba
se.
@!@4@1161018533@0
Adding task "clic_switch_update_global_conf_entry" to the SAM registration da
ta base.
@!@4@1161018533@0
Adding task "clic_switch_update_rarpd_conf_entry" to the SAM registration dat
a base.
@!@4@1161018533@0
Adding task "clic_switch_read_rarpd_init_var_array" to the SAM registration d
ata base.
@!@4@1161018533@0
Adding task "clic_switch_update_mcast_global_conf_entry" to the SAM registrat
ion data base.
@!@4@1161018533@0
Adding task "clic_adapter_update_bcompat_conf_entry" to the SAM registration
data base.
@!@4@1161018533@0
Adding task "clic_verify_ip_inuse" to the SAM registration data base.
@!@4@1161018533@0
Adding class "CLIC_VAR" to the SAM class registration database."
@!@4@1161018533@0
Adding class "CLIC_IF" to the SAM class registration database."
@!@4@1161018533@0
Adding class "CLIC_SWITCH_VAR" to the SAM class registration database."
@!@4@1161018533@0
Adding class "CLIC_SWITCH_IF" to the SAM class registration database."
@!@2@1161018534@0
samreg: Adding /usr/sam/lib/clic to /etc/sam/reg_dirs.db
@!@1@1161018534@0
samreg: /usr/sam/lib/clic successfully registered in SAM databases.
@!@1@1161018555@0
samreg: Begin SAM registration of /opt/resmon/bin
@!@2@1161018555@0
samreg: Adding /opt/resmon/bin to /etc/sam/reg_dirs.db
@!@1@1161018556@0
samreg: /opt/resmon/bin successfully registered in SAM databases.
@!@1@1161018556@0
samreg: Begin SAM registration of /usr/sam/lib/atm
@!@4@1161018556@0
Adding task "atm_get_hpux_revision" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_revision_number" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_card_speed" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_add_ip_host" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_del_ip_host" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_lecs_addr" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_wk_lecs_addr" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_pvc" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_svc" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_add_svc_config" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_del_svc_config" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_del_pvc_config" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_check_pvc_range" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_coherence_card_num" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_add_pvc_config" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_put_card_num" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_extract_resources" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_is_needed_to_boot" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_is_prilec_on_sec_card" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_if_exist_interface" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_resource_lec" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_put_resource_lec" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_remove_resource_lec" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_is_there_udr" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_check_monitor_is_running" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_class_ha_cards" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_extract_shapers" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_shapers" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_netprefix" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_varconf" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_put_varconf" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_mac_address" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_status_card" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_config_file" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_default_config_file_155_gsc" to the SAM registration dat
a base.
@!@4@1161018556@0
Adding task "atm_get_default_config_file_155_nio" to the SAM registration dat
a base.
@!@4@1161018556@0
Adding task "atm_get_default_config_file_155_gsc_plus" to the SAM registratio
n data base.
@!@4@1161018556@0
Adding task "atm_get_default_config_file_622_gsc_plus" to the SAM registratio
n data base.
@!@4@1161018556@0
Adding task "atm_put_config_file" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_put_config_file_el" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_update_sec_lec" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_update_sec_svcs" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_put_config_file_el_bk" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_put_config_file_ip" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_default_svc_config" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_natives_svc_config" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_get_default_pvc_config_nio_gsc" to the SAM registration data
base.
@!@4@1161018556@0
Adding task "atm_get_default_pvc_config_155_gsc_plus" to the SAM registration
data base.
@!@4@1161018556@0
Adding task "atm_get_default_pvc_config_622_gsc_plus" to the SAM registration
data base.
@!@4@1161018556@0
Adding task "atm_unconfigure_atm_card" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_enable_atm_if" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_disable_atm_if" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_remove_atm_if" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_stop_atm_card" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_start_atmcard" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_delete_line" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_add_line" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_plugged_cards" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_check_if_initialized" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_initialize_subsystem" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_check_atmconf_file" to the SAM registration data base.
@!@4@1161018556@0
Adding task "atm_check_atmcards" to the SAM registration data base.
@!@4@1161018556@0
Adding class "HP_ATM_CARD" to the SAM class registration database."
@!@4@1161018556@0
Adding class "HP_ATM_IF" to the SAM class registration database."
@!@4@1161018556@0
Adding class "ATM_VC_CONFIG" to the SAM class registration database."
@!@4@1161018556@0
Adding class "ATMUPDATEFILES" to the SAM class registration database."
@!@2@1161018556@0
samreg: Adding /usr/sam/lib/atm to /etc/sam/reg_dirs.db
@!@1@1161018556@0
samreg: /usr/sam/lib/atm successfully registered in SAM databases.
@!@1@1161018557@0
samreg: Begin SAM registration of /usr/sam/lib/clic
@!@4@1161018557@0
Adding task "clic_adapter_get_list" to the SAM registration data base.
@!@4@1161018557@0
Adding task "clic_adapter_read_global_conf_file" to the SAM registration data
base.
@!@4@1161018557@0
Adding task "clic_adapter_read_init_var_array" to the SAM registration data b
ase.
@!@4@1161018557@0
Adding task "clic_adapter_update_conf_entry" to the SAM registration data bas
e.
@!@4@1161018557@0
Adding task "clic_check_running" to the SAM registration data base.
@!@4@1161018557@0
Adding task "clic_get_max_netconf_index" to the SAM registration data base.
@!@4@1161018557@0
Adding task "clic_kill_daemon" to the SAM registration data base.
@!@4@1161018557@0
Adding task "clic_check_suspension" to the SAM registration data base.
@!@4@1161018557@0
Adding task "clic_start_hf" to the SAM registration data base.
@!@4@1161018557@0
Adding task "clic_ifconfig_up_all_hf_nics" to the SAM registration data base.
@!@4@1161018557@0
Adding task "clic_ifconfig_up_ola_hf_nics" to the SAM registration data base.
@!@4@1161018557@0
Adding task "clic_ifconfig_down_all_hf_nics" to the SAM registration data bas
e.
@!@4@1161018557@0
Adding task "clic_switch_get_list" to the SAM registration data base.
@!@4@1161018557@0
Adding task "clic_switch_read_init_var_array" to the SAM registration data ba
se.
@!@4@1161018557@0
Adding task "clic_switch_update_global_conf_entry" to the SAM registration da
ta base.
@!@4@1161018557@0
Adding task "clic_switch_update_rarpd_conf_entry" to the SAM registration dat
a base.
@!@4@1161018557@0
Adding task "clic_switch_read_rarpd_init_var_array" to the SAM registration d
ata base.
@!@4@1161018557@0
Adding task "clic_switch_update_mcast_global_conf_entry" to the SAM registrat
ion data base.
@!@4@1161018557@0
Adding task "clic_adapter_update_bcompat_conf_entry" to the SAM registration
data base.
@!@4@1161018557@0
Adding task "clic_verify_ip_inuse" to the SAM registration data base.
@!@4@1161018557@0
Adding class "CLIC_VAR" to the SAM class registration database."
@!@4@1161018557@0
Adding class "CLIC_IF" to the SAM class registration database."
@!@4@1161018557@0
Adding class "CLIC_SWITCH_VAR" to the SAM class registration database."
@!@4@1161018557@0
Adding class "CLIC_SWITCH_IF" to the SAM class registration database."
@!@2@1161018557@0
samreg: Adding /usr/sam/lib/clic to /etc/sam/reg_dirs.db
@!@1@1161018557@0
samreg: /usr/sam/lib/clic successfully registered in SAM databases.
@!@1@1161018559@0
samreg: Begin SAM registration of /usr/lib/X11/Xserver/misc/sam
@!@2@1161018559@0
samreg: Adding /usr/lib/X11/Xserver/misc/sam to /etc/sam/reg_dirs.db
@!@1@1161018559@0
samreg: /usr/lib/X11/Xserver/misc/sam successfully registered in SAM database
s.
@!@1@1161018562@0
samreg: Begin SAM registration of /usr/lib/X11/Xserver/misc/sam
@!@2@1161018562@0
samreg: Adding /usr/lib/X11/Xserver/misc/sam to /etc/sam/reg_dirs.db
@!@1@1161018563@0
samreg: /usr/lib/X11/Xserver/misc/sam successfully registered in SAM database
s.
@!@1@1161018564@0
samreg: Begin SAM unregistration of /opt/parmgr/lib/parmgr
@!@32@1161018564@0
An attempt to unregister the file "/opt/parmgr/lib/parmgr/parmgr.tm" from the
SAM registration database failed because that file was not in the database.
@!@32@1161018564@0
An attempt to unregister the file "/opt/parmgr/lib/parmgr/parmgr.da" from the
SAM registration database failed because that file was not in the database.
@!@1@1161018564@0
samreg: /opt/parmgr/lib/parmgr successfully unregistered from SAM databases.
@!@4@1161019118@0
Attempting to read default values for kernel configuration (drivers, subsyste
ms, devices, and tunable parameters) from both the *.tx files in /usr/sam/lib
/kc and from /usr/conf/master.d/*.
@!@8@1161019118@0
Entering Task Manager with task kc_cmd_get_drivers.
@!@4@1161019119@0
Getting the driver/module descriptions from /usr/sam/lib/kc/drivers*.tx
@!@4@1161019119@0
Executing the following command:\C/usr/bin/cat /usr/sam/lib/kc/drivers*.tx\C
@!@4@1161019119@0
Command completed with exit status 0.
@!@8@1161019119@0
Exiting Task Manager with task kc_cmd_get_drivers.
@!@8@1161019119@0
Entering Task Manager with task kc_cmd_get_params.
@!@4@1161019119@0
Getting the parameter descriptions from /usr/sam/lib/kc/param*.tx
@!@4@1161019119@0
Executing the following command:\C/usr/bin/cat /usr/sam/lib/kc/params*.tx\C
@!@4@1161019119@0
Command completed with exit status 0.
@!@8@1161019119@0
Exiting Task Manager with task kc_cmd_get_params.
@!@8@1161019119@0
Entering Task Manager with task kc_cmd_get_subsystems.
@!@4@1161019119@0
Getting the subsystem descriptions from /usr/sam/lib/kc/subsys*.tx
@!@4@1161019119@0
Executing the following command:\C/usr/bin/cat /usr/sam/lib/kc/subsys*.tx\C
@!@4@1161019119@0
Command completed with exit status 0.
@!@8@1161019119@0
Exiting Task Manager with task kc_cmd_get_subsystems.
@!@8@1161019119@0
getkinfo: Cannot find driver pfo listed in /usr/conf/master.d/* tables.
@!@8@1161019121@0
getkinfo: Cannot find driver token1 listed in /usr/conf/master.d/* tables.
@!@8@1161019121@0
Entering Task Manager with task kc_get_dependencies.
@!@4@1161019121@0
Parsing master files for driver dependencies.
@!@4@1161019121@0
Executing the following command:\C/usr/sam/lbin/kc_get_deps /usr/conf/master.
d/*\C
@!@4@1161019121@0
Command completed with exit status 0.
@!@8@1161019121@0
Exiting Task Manager with task kc_get_dependencies.
@!@8@1161019121@0
Entering Task Manager with task KC_CMD_GET_TUNABLES.
@!@2@1161019121@0
Retrieving information about kernel tunables.
@!@2@1161019121@0
Executing the following command:\C/usr/sbin/kmtune -l -S /stand/system | awk '
$1 ~ /Pa/ {P=$2} $1 ~ /Pl/ {V=$2} $1 ~ /C/ {C=$2} $1 ~ /De/ {
De=$2} $1 ~ /Mi/ {Mi=$2} $1 ~ /Mo/ {Mo=$2} $1 ~ /Dy/ {print P ";"
V ";" C ";" De ";" Mi ";" Mo ";" $2;}'\C
@!@2@1161019122@0
Command completed with exit status 0.
@!@2@1161019122@0
Succeeded in Retrieving information about kernel tunables.
@!@8@1161019122@0
Exiting Task Manager with task KC_CMD_GET_TUNABLES.
@!@8@1161019122@0
Entering Task Manager with task KC_PARSE_RANGE_STMTS.
@!@4@1161019122@0
Parsing range statements in system master files
@!@4@1161019122@0
Executing the following command:\C/usr/sam/lbin/kc_parse_range /usr/conf/mast
er.d/*\C
@!@4@1161019122@0
Command completed with exit status 0.
@!@8@1161019122@0
Exiting Task Manager with task KC_PARSE_RANGE_STMTS.
@!@8@1161019122@0
Entering Task Manager with task kc_cmd_get_kernel_lib_info.
@!@4@1161019122@0
Getting the entry point information from the libraries in /usr/conf/lib.
@!@4@1161019122@0
Executing the following command:\C/usr/ccs/bin/nm -P /usr/conf/lib/*.a /etc/o
pt/sicl/*.a | /usr/bin/grep -e '_install ' -e '_link ' -e '_open ' -e '
_init '\C
@!@4@1161019141@0
Command completed with exit status 0.
@!@8@1161019141@0
Exiting Task Manager with task kc_cmd_get_kernel_lib_info.
@!@8@1161019141@0
Entering Task Manager with task kc_cmd_get_system_file.
@!@4@1161019141@0
Getting the system file from /stand/vmunix
@!@4@1161019141@0
Executing the following command:\C/usr/lbin/sysadm/get_sysfile /stand/vmunix
> /var/sam/SAM_kfile\C
@!@4@1161019142@0
Command completed with exit status 0.
@!@8@1161019142@0
Exiting Task Manager with task kc_cmd_get_system_file.
@!@8@1161019142@0
Entering Task Manager with task kc_cmd_get_system_file.
@!@4@1161019142@0
Getting the system file from /stand/vmunix
@!@4@1161019142@0
Executing the following command:\C/usr/lbin/sysadm/get_sysfile /stand/vmunix
> /var/sam/SAM_kfile\C
@!@4@1161019142@0
Command completed with exit status 0.
@!@8@1161019142@0
Exiting Task Manager with task kc_cmd_get_system_file.
@!@8@1161019142@0
Entering Task Manager with task KC_CMD_GET_STATIC_DRIVERS.
@!@2@1161019142@0
Retrieving staticly-bound drivers in current kernel.
@!@2@1161019142@0
Executing the following command:\C/usr/sbin/kmadmin -k\C
@!@2@1161019142@0
Command completed with exit status 0.
@!@2@1161019142@0
Succeeded in Retrieving staticly-bound drivers in current kernel.
@!@8@1161019142@0
Exiting Task Manager with task KC_CMD_GET_STATIC_DRIVERS.
@!@8@1161019142@0
Entering Task Manager with task KC_CMD_GET_TUNABLES.
@!@2@1161019142@0
Retrieving information about kernel tunables.
@!@2@1161019142@0
Executing the following command:\C/usr/sbin/kmtune -l -S /var/sam/SAM_kfile |
awk '$1 ~ /Pa/ {P=$2} $1 ~ /Pl/ {V=$2} $1 ~ /C/ {C=$2} $1 ~ /
De/ {De=$2} $1 ~ /Mi/ {Mi=$2} $1 ~ /Mo/ {Mo=$2} $1 ~ /Dy/ {print
P ";" V ";" C ";" De ";" Mi ";" Mo ";" $2;}'\C
@!@2@1161019142@0
Command completed with exit status 0.
@!@2@1161019142@0
Succeeded in Retrieving information about kernel tunables.
@!@8@1161019142@0
Exiting Task Manager with task KC_CMD_GET_TUNABLES.
@!@4@1161021298@0
Attempting to read default values for kernel configuration (drivers, subsyste
ms, devices, and tunable parameters) from both the *.tx files in /usr/sam/lib
/kc and from /usr/conf/master.d/*.
@!@8@1161021298@0
Entering Task Manager with task kc_cmd_get_drivers.
@!@4@1161021298@0
Getting the driver/module descriptions from /usr/sam/lib/kc/drivers*.tx
@!@4@1161021298@0
Executing the following command:\C/usr/bin/cat /usr/sam/lib/kc/drivers*.tx\C
@!@4@1161021298@0
Command completed with exit status 0.
@!@8@1161021298@0
Exiting Task Manager with task kc_cmd_get_drivers.
@!@8@1161021298@0
Entering Task Manager with task kc_cmd_get_params.
@!@4@1161021298@0
Getting the parameter descriptions from /usr/sam/lib/kc/param*.tx
@!@4@1161021298@0
Executing the following command:\C/usr/bin/cat /usr/sam/lib/kc/params*.tx\C
@!@4@1161021298@0
Command completed with exit status 0.
@!@8@1161021298@0
Exiting Task Manager with task kc_cmd_get_params.
@!@8@1161021298@0
Entering Task Manager with task kc_cmd_get_subsystems.
@!@4@1161021298@0
Getting the subsystem descriptions from /usr/sam/lib/kc/subsys*.tx
@!@4@1161021298@0
Executing the following command:\C/usr/bin/cat /usr/sam/lib/kc/subsys*.tx\C
@!@4@1161021298@0
Command completed with exit status 0.
@!@8@1161021298@0
Exiting Task Manager with task kc_cmd_get_subsystems.
@!@8@1161021298@0
getkinfo: Cannot find driver pfo listed in /usr/conf/master.d/* tables.
@!@8@1161021298@0
getkinfo: Cannot find driver token1 listed in /usr/conf/master.d/* tables.
@!@8@1161021299@0
Entering Task Manager with task kc_get_dependencies.
@!@4@1161021299@0
Parsing master files for driver dependencies.
@!@4@1161021299@0
Executing the following command:\C/usr/sam/lbin/kc_get_deps /usr/conf/master.
d/*\C
@!@4@1161021299@0
Command completed with exit status 0.
@!@8@1161021299@0
Exiting Task Manager with task kc_get_dependencies.
@!@8@1161021299@0
Entering Task Manager with task KC_CMD_GET_TUNABLES.
@!@2@1161021299@0
Retrieving information about kernel tunables.
@!@2@1161021299@0
Executing the following command:\C/usr/sbin/kmtune -l -S /stand/system | awk '
$1 ~ /Pa/ {P=$2} $1 ~ /Pl/ {V=$2} $1 ~ /C/ {C=$2} $1 ~ /De/ {
De=$2} $1 ~ /Mi/ {Mi=$2} $1 ~ /Mo/ {Mo=$2} $1 ~ /Dy/ {print P ";"
V ";" C ";" De ";" Mi ";" Mo ";" $2;}'\C
@!@2@1161021299@0
Command completed with exit status 0.
@!@2@1161021299@0
Succeeded in Retrieving information about kernel tunables.
@!@8@1161021299@0
Exiting Task Manager with task KC_CMD_GET_TUNABLES.
@!@8@1161021299@0
Entering Task Manager with task KC_PARSE_RANGE_STMTS.
@!@4@1161021299@0
Parsing range statements in system master files
@!@4@1161021299@0
Executing the following command:\C/usr/sam/lbin/kc_parse_range /usr/conf/mast
er.d/*\C
@!@4@1161021299@0
Command completed with exit status 0.
@!@8@1161021299@0
Exiting Task Manager with task KC_PARSE_RANGE_STMTS.
@!@8@1161021299@0
Entering Task Manager with task kc_cmd_get_kernel_lib_info.
@!@4@1161021299@0
Getting the entry point information from the libraries in /usr/conf/lib.
@!@4@1161021299@0
Executing the following command:\C/usr/ccs/bin/nm -P /usr/conf/lib/*.a /etc/o
pt/sicl/*.a | /usr/bin/grep -e '_install ' -e '_link ' -e '_open ' -e '
_init '\C
@!@4@1161021311@0
Command completed with exit status 0.
@!@8@1161021311@0
Exiting Task Manager with task kc_cmd_get_kernel_lib_info.
@!@8@1161021311@0
Entering Task Manager with task kc_cmd_get_system_file.
@!@4@1161021311@0
Getting the system file from /stand/vmunix
@!@4@1161021311@0
Executing the following command:\C/usr/lbin/sysadm/get_sysfile /stand/vmunix
> /var/sam/SAM_kfile\C
@!@4@1161021311@0
Command completed with exit status 0.
@!@8@1161021311@0
Exiting Task Manager with task kc_cmd_get_system_file.
@!@8@1161021311@0
Entering Task Manager with task kc_cmd_get_system_file.
@!@4@1161021311@0
Getting the system file from /stand/vmunix
@!@4@1161021311@0
Executing the following command:\C/usr/lbin/sysadm/get_sysfile /stand/vmunix
> /var/sam/SAM_kfile\C
@!@4@1161021311@0
Command completed with exit status 0.
@!@8@1161021311@0
Exiting Task Manager with task kc_cmd_get_system_file.
@!@8@1161021311@0
Entering Task Manager with task KC_CMD_GET_STATIC_DRIVERS.
@!@2@1161021311@0
Retrieving staticly-bound drivers in current kernel.
@!@2@1161021311@0
Executing the following command:\C/usr/sbin/kmadmin -k\C
@!@2@1161021311@0
Command completed with exit status 0.
@!@2@1161021311@0
Succeeded in Retrieving staticly-bound drivers in current kernel.
@!@8@1161021311@0
Exiting Task Manager with task KC_CMD_GET_STATIC_DRIVERS.
@!@8@1161021312@0
Entering Task Manager with task KC_CMD_GET_TUNABLES.
@!@2@1161021312@0
Retrieving information about kernel tunables.
@!@2@1161021312@0
Executing the following command:\C/usr/sbin/kmtune -l -S /var/sam/SAM_kfile |
awk '$1 ~ /Pa/ {P=$2} $1 ~ /Pl/ {V=$2} $1 ~ /C/ {C=$2} $1 ~ /
De/ {De=$2} $1 ~ /Mi/ {Mi=$2} $1 ~ /Mo/ {Mo=$2} $1 ~ /Dy/ {print
P ";" V ";" C ";" De ";" Mi ";" Mo ";" $2;}'\C
@!@2@1161021312@0
Command completed with exit status 0.
@!@2@1161021312@0
Succeeded in Retrieving information about kernel tunables.
@!@8@1161021312@0
Exiting Task Manager with task KC_CMD_GET_TUNABLES.
@!@4@1161068308@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161068308@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161068308@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@1@1161075060@0
samreg: Begin SAM unregistration of /usr/lib/X11/Xserver/misc/sam
@!@2@1161075060@0
samreg: Removing /usr/lib/X11/Xserver/misc/sam from /etc/sam/reg_dirs.db
@!@1@1161075060@0
samreg: /usr/lib/X11/Xserver/misc/sam successfully unregistered from SAM data
bases.
@!@1@1161075383@0
samreg: Begin SAM registration of /usr/lib/X11/Xserver/misc/sam
@!@2@1161075383@0
samreg: Adding /usr/lib/X11/Xserver/misc/sam to /etc/sam/reg_dirs.db
@!@1@1161075384@0
samreg: /usr/lib/X11/Xserver/misc/sam successfully registered in SAM database
s.
@!@4@1161075432@0
Attempting to read default values for kernel configuration (drivers, subsyste
ms, devices, and tunable parameters) from both the *.tx files in /usr/sam/lib
/kc and from /usr/conf/master.d/*.
@!@8@1161075432@0
Entering Task Manager with task kc_cmd_get_drivers.
@!@16@1161075432@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161077838@0
Attempting to read default values for kernel configuration (drivers, subsyste
ms, devices, and tunable parameters) from both the *.tx files in /usr/sam/lib
/kc and from /usr/conf/master.d/*.
@!@8@1161077838@0
Entering Task Manager with task kc_cmd_get_drivers.
@!@16@1161077838@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161084582@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161084582@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161084582@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161084588@0
Tue Oct 17 16:59:48 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161084588@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161084589@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161095432@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161095432@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161095432@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161095438@0
Tue Oct 17 20:00:38 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161095438@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161095438@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161095476@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161095476@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161095476@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161095478@0
Tue Oct 17 20:01:18 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161095478@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161095478@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161095602@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161095602@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@129@1161095603@0
Tue Oct 17 20:03:23 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161095603@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161095603@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161095602@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@4@1161148655@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161148655@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161148655@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161148666@0
Wed Oct 18 10:47:46 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161148666@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161148666@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161148822@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161148822@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161148822@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161148826@0
Wed Oct 18 10:50:26 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161148826@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161148826@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161149154@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161149155@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161149155@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161149156@0
Wed Oct 18 10:55:56 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161149156@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161149156@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161149174@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161149174@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161149175@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161149178@0
Wed Oct 18 10:56:18 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161149178@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161149178@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161149288@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161149288@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161149288@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161149293@0
Wed Oct 18 10:58:13 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161149293@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161149293@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161149472@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161149472@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161149472@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161149476@0
Wed Oct 18 11:01:16 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161149476@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161149476@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161149501@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161149501@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161149501@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161149505@0
Wed Oct 18 11:01:45 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161149505@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161149505@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161149539@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161149539@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161149539@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161149543@0
Wed Oct 18 11:02:23 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161149543@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161149543@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161149595@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161149595@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161149595@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161149597@0
Wed Oct 18 11:03:17 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161149597@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161149597@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161149805@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161149805@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161149805@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161149808@0
Wed Oct 18 11:06:48 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161149808@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161149808@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161150145@0
Attempting to read default values for kernel configuration (drivers, subsyste
ms, devices, and tunable parameters) from both the *.tx files in /usr/sam/lib
/kc and from /usr/conf/master.d/*.
@!@8@1161150145@0
Entering Task Manager with task kc_cmd_get_drivers.
@!@16@1161150145@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161150145@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161150145@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161150145@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161150157@0
Wed Oct 18 11:12:37 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161150157@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161150157@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161150343@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161150343@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161150343@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161150348@0
Wed Oct 18 11:15:48 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161150348@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161150348@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@1@1161150834@0
samreg: Begin SAM registration of /opt/perf/help/gp
@!@2@1161150834@0
samreg: Adding /opt/perf/help/gp to /etc/sam/reg_dirs.db
@!@1@1161150835@0
samreg: /opt/perf/help/gp successfully registered in SAM databases.
@!@1@1161150835@0
samreg: Begin SAM registration of /opt/perf/help/gp
@!@2@1161150835@0
samreg: Adding /opt/perf/help/gp to /etc/sam/reg_dirs.db
@!@1@1161150836@0
samreg: /opt/perf/help/gp successfully registered in SAM databases.
@!@1@1161150837@0
samreg: Begin SAM registration of /opt/perf/help/gp
@!@2@1161150837@0
samreg: Adding /opt/perf/help/gp to /etc/sam/reg_dirs.db
@!@1@1161150837@0
samreg: /opt/perf/help/gp successfully registered in SAM databases.
@!@4@1161151186@0
Attempting to read default values for kernel configuration (drivers, subsyste
ms, devices, and tunable parameters) from both the *.tx files in /usr/sam/lib
/kc and from /usr/conf/master.d/*.
@!@8@1161151187@0
Entering Task Manager with task kc_cmd_get_drivers.
@!@16@1161151187@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161168908@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161168908@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161168908@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161168913@0
Wed Oct 18 16:25:13 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161168913@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161168913@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161168931@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161168931@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161168931@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161168933@0
Wed Oct 18 16:25:33 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161168933@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161168933@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161169807@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161169807@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161169807@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161169810@0
Wed Oct 18 16:40:10 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161169810@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161169810@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161171312@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161171312@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161171312@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161171316@0
Wed Oct 18 17:05:16 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161171316@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161171316@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161171355@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161171355@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161171355@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161171357@0
Wed Oct 18 17:05:57 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161171357@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161171357@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161172072@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161172072@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161172072@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161172076@0
Wed Oct 18 17:17:56 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161172076@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161172076@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
@!@4@1161172525@0
ioparser.sh: Executing the following command:\Cinsf > /dev/null 2>&1\Cto bind
devices to Card Instance numbers.
@!@4@1161172525@0
ioparser.sh: Determine if ioscan is to be run. If ioscan is not run at this
time use previous ioscan output cached in $IOSCAN_OUT.
@!@4@1161172525@0
ioparser.sh: Executing the following command:\Cioscan $* > $IOSCAN_OUT\C
@!@129@1161172527@0
Wed Oct 18 17:25:27 2006 Entering SAM area "System Administration Manager (pa
mpa)".
@!@8@1161172528@0
Entering Task Manager with task FAL_IS_MUL_SAMS.
@!@16@1161172528@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table. Lo
cation: arch_err_handler.C:256 Error Code: 5000
_______________________________________________

Thanks in advance for advance help.

Suman

[Peter Godron]

Suman,
try this thread for further info:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=946068

[Suman Patra]

Thanks a lot.

It is working now.

Suman
Bangalore

[Peter Godron]

Suman,
if you are happy with the answer please read:
http://forums1.itrc.hp.com/service/forums/helptips.do?#28

Please also detail what you did to correct the error and close the thread. This will help future similar queries being resolved just as quick. ;-)