SAM

[Indrajit Bhagat]

how can we start the SAM in GUI mode.
Can you help me in setting the DISPLAY variable

[Ivan Krastev · Accepted solution]

See this related threads:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1049338

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1055731

regards,
ivan

[David Bellamy]

In an Xwindow session type "export DISPLAY=xx.xx.xx:0.0" this will set your Display, after that just type in sam

[Steven E. Protter]

Shalom,

From a Linux machine

ssh -X hostname sam

This will show sam in gui mode on the Linux box

export DISPLAY=hostnameofclient:0.0
example
export DISPLAY=192.168.0.10:0.0
sam

IF the 192 address is the address of the remote workstation.

The ssh -X or -Y will work from another HP-UX box if you are logged into CDE.

SEP

[A. Clay Stephenson]

You first need to have a X terminal or a PC running an X-emulator such as Reflection X or eXceed -- or a Linux Box with a graphics console. After that, it's very simple.

1) telnet to your UNIX box and login normally.
2) export DISPLAY=mypc:0.0
or export DISPLAY=10.1.2.234:0.0

Use the PC's or X-terminal IP hostname or IP address.

3) sam &

[Reshma Malusare]

Hi Indrajit,
use
export display=hostname:0.0
It will take SAM in GUI mode.

Regards
Reshma