samd on 11i eats 95% of processor time

[D`oka Illia]

Hi all.
On my A400 and A180 I have installed 11i. And I have seen that samd eats 95%-98% of processor time. While on D250 all is OK.

What does it mean.

[Corthouts Carlo]

Hi,

The problem is that you have installed the wrong version of DCE. This causes samd taking about 95% of your CPU.

Installing the most recent version of DCE solves the problem.

[melvyn burnard]

Check your version of DCE you installed onto these systems, I suspect you have the wrong version installed.

[Alex Glennie]

We've seen this problem before when
the wrong version of DCE is installed on the system. Could this be applicable ?

/opt/dce/bin/dce_version = HP DCE/9000
1.8

Also worth checking are the what outputs of other dce libs etc :

usr/lib/pa20_64/libdcekt.1
DCE-Core.DCE-COR-64SLIB: /usr/lib/pa20_64/libdcekt.sl
DCE-Core.DCE-CORE-SHLIB: /usr/lib/libdcekt.1
DCE-Core.DCE-CORE-SHLIB: /usr/lib/libdcekt.sl
DCE-CoreTools.DCE-BPRG: /opt/dce/lib/libdcekt.a
DCE-CoreTools.DCE-BPRG: /usr/lib/libdcekt.a

also patch levels of dce,Sam & libc.

swlist -l fileset -a state | grep -v ^\# | grep -v configured ?

[Corthouts Carlo]

With "swlist -l fileset | grep -i dce" you can check which
version of dce you have installed. Check the revision which is on your system.

It is probably the 11.00 version which should be replaced by the 11.11 version.