SCSI: Resetting SCSI....??

[mark.M]

hi~!
i'm find message error of scsi.
model : rp7420(no partition config), v11.23.
what is mean???

=============================================

SCSI: Reset detected -- lbolt: 16241, bus: 1 path: 1/0/0/3/1
SCSI: isrEscape Controller at 1/0/0/3/1.

SCSI: Scripts detected non-active tag -- lbolt: 20213, bus: 1
lbp->state: 30008
lbp->offset: ffffffff
lbp->nominalOffset: 270
lbp->Cmdindex: 2
lbp->last_nexus_index: 0
lbp->nexus_index: 1
uCmdSent: 2005880 uNexus_offset: 15604
last lbp->puStatus [00000000662d5600]:
ff031208 00000000 00000000 00000000
next lbp->puStatus [00000000662d57f0]:
00000000 00000000 00000000 00000000
From most recent interrupt:
ISTAT: 09, SIST0: 00, SIST1: 00, DSTAT: 84, DSPS: 00000018
lsp: 0x0000000000000000
DSAtbl->host_iocb_index: 2
DSAtbl->host_iocb_addr: 15880
scratch_lsp: 0x0000000000000000
c8xx_iocb [ffffff0100002b00]:
02005880 ff007208 00011000 bf020e00
00000005 00015860 00000006 00015868
Pre-DSP script dump [ffffff010000210c]:
00010200 80002b60 e1340004 80002b60
e1640004 80002b64 74360100 00000000
Script dump [ffffff010000212c]:
980c0000 00000018 7a5c0100 00000000
7a360200 00000000 f1080001 000000e0
NCR chip register dump for: 0x4002002
00: SCNTL3: bf SCNTL2: 80 SCNTL1: 10 SCNTL0: da
04: GPREG: 0e SDID: 02 SXFER: 0e SCID: 47
08: SBCL: 21 SSID: 82 SOCL: 07 SFBR: 00
0c: SSTAT2: 01 SSTAT1: 01 SSTAT0: 00 DSTAT: 80
10: DSA: 80002b00
14: MBOX1: 00 MBOX0: 00 ISTAT1: 00 ISTAT: 08
1c: TEMP: 80002108
24: DCMDDBC: 980c0000
28: DNAD: 8000212c
2c: DSP: 80002134
30: DSPS: 00000018
34: SCRATCHA: 00000000
38: DCNTL: a1 DWT: 00 DIEN: 7f DMODE: 4c
3c: ADDER: 8000214c
40: SIST1: 00 SIST0: 10 SIEN1: 97 SIEN0: 8f
44: GPCNTL: 2f MACNTL: 00 SWIDE: 00 SLPAR: 00
48: RESPID1: 00 RESPID0: 80 STIME1: 10 STIME0: ec
4c: STEST3: 80 STEST2: 00 STEST1: 0c STEST0: 75
50: RESV50: 0e RESV51: 80 SIDL1: 00 SIDL0: 80
54: CCNTL1: 01 CCNTL0: 01 SODL1: 00 SODL0: 00
58: RESV58: 00 RESV59: 00 SBDL1: 92 SBDL0: 55
5c: SCRATCHB: 00020002
60: SCRATCHC: 0000003c
64: SCRATCHD: 80002288
68: SCRATCHE: 80002c00
6c: SCRATCHF: 00010200
70: SCRATCHG: 0c010302
74: SCRATCHH: 00015604
78: SCRATCHI: 0c01bf0e
7c: SCRATCHJ: 02005880
bc: SCNTL4: 00
PCI configuration register dump:
Command: 0157
Latency Timer: ff
Cache Line Size: 20

SCSI: Resetting SCSI -- lbolt: 20313, bus: 1 path: 1/0/0/3/1

SCSI: Reset detected -- lbolt: 20313, bus: 1 path: 1/0/0/3/1
SCSI: isrEscape Controller at 1/0/0/3/1.

SCSI: Scripts detected non-active tag -- lbolt: 20718, bus: 1
lbp->state: 30008
lbp->offset: ffffffff
lbp->nominalOffset: 270
lbp->Cmdindex: 3
lbp->last_nexus_index: 1
lbp->nexus_index: 2
uCmdSent: 30058c0 uNexus_offset: 15608
last lbp->puStatus [00000000662d5600]:
ff031208 00031208 00000000 00000000
next lbp->puStatus [00000000662d57f0]:
00000000 00000000 00000000 00000000
From most recent interrupt:
ISTAT: 09, SIST0: 00, SIST1: 00, DSTAT: 84, DSPS: 00000018
lsp: 0x0000000000000000
DSAtbl->host_iocb_index: 3
DSAtbl->host_iocb_addr: 158c0
scratch_lsp: 0x0000000000000000
c8xx_iocb [ffffff0100002b00]:
030058c0 ff007208 00011000 bf020e00
00000005 000158a0 00000006 000158a8
Pre-DSP script dump [ffffff010000210c]:
00010200 80002b60 e1340004 80002b60
e1640004 80002b64 74360100 00000000
Script dump [ffffff010000212c]:
980c0000 00000018 7a5c0100 00000000
7a360200 00000000 f1080001 000000e0
NCR chip register dump for: 0x4002002
00: SCNTL3: bf SCNTL2: 80 SCNTL1: 10 SCNTL0: da
04: GPREG: 0e SDID: 02 SXFER: 0e SCID: 47
08: SBCL: 21 SSID: 82 SOCL: 07 SFBR: 00
0c: SSTAT2: 01 SSTAT1: 01 SSTAT0: 00 DSTAT: 80
10: DSA: 80002b00
14: MBOX1: 00 MBOX0: 00 ISTAT1: 00 ISTAT: 08
1c: TEMP: 80002108
24: DCMDDBC: 980c0000
28: DNAD: 8000212c
2c: DSP: 80002134
30: DSPS: 00000018
34: SCRATCHA: 00000000
38: DCNTL: a1 DWT: 00 DIEN: 7f DMODE: 4c
3c: ADDER: 8000214c
40: SIST1: 00 SIST0: 10 SIEN1: 97 SIEN0: 8f
44: GPCNTL: 2f MACNTL: 00 SWIDE: 00 SLPAR: 00
48: RESPID1: 00 RESPID0: 80 STIME1: 10 STIME0: ec
4c: STEST3: 80 STEST2: 00 STEST1: 0c STEST0: 75
50: RESV50: 0e RESV51: 80 SIDL1: 00 SIDL0: 80
54: CCNTL1: 01 CCNTL0: 01 SODL1: 00 SODL0: 00
58: RESV58: 00 RESV59: 00 SBDL1: 92 SBDL0: 55
5c: SCRATCHB: 00020002
60: SCRATCHC: 0000003c
64: SCRATCHD: 80002288
68: SCRATCHE: 80002c00
6c: SCRATCHF: 00010200
70: SCRATCHG: 0c010303
74: SCRATCHH: 00015608
78: SCRATCHI: 0c01bf0e
7c: SCRATCHJ: 030058c0
bc: SCNTL4: 00
PCI configuration register dump:
Command: 0157
Latency Timer: ff
Cache Line Size: 20

SCSI: Resetting SCSI -- lbolt: 20818, bus: 1 path: 1/0/0/3/1

SCSI: Reset detected -- lbolt: 20818, bus: 1 path: 1/0/0/3/1
htisdb[/var/opt/resmon/log]#
htisdb[/var/opt/resmon/log]# ioscan -fnkCdisk
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
disk 1 1/0/0/3/0.6.0 sdisk CLAIMED DEVICE HP 73.4GST373454LC
/dev/dsk/c0t6d0 /dev/rdsk/c0t6d0
disk 0 1/0/0/3/1.2.0 sdisk CLAIMED DEVICE _NEC DVD+RW ND-2100AD
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 2 1/0/1/1/0/1/1.6.0 sdisk CLAIMED DEVICE HP 73.4GST373454LC
/dev/dsk/c3t6d0 /dev/rdsk/c3t6d0
htisdb[/var/opt/resmon/log]#

==============================================

[IT_2007]

SCSI reset happens if there is any hardware issues. Please check any disks attached to the path 1/0/0/3/1 other than DVD drive.

[Steven E. Protter]

Shalom,

Dead disk or related hardware is dead.

Also, it can be triggered by swapping out a hot swap disk.

dmesg -

wait

dmesg

If the error still occurs start hardware diagnosis or call the hardware folks in.


SEP