Secure Path 3.0D for 11.11

[Igor Sovin]

Hi there!
When I try to install Secure Path 3.0D for 11.11, I receive some messages telling me that I haven't several patches installed.
Does anybody can help me to find pathes for Secure Path 3.0D for 11.11 or give me a link to download?

regards
Igor

[Zygmunt Krawczyk]

Hi Igor,

it seems, that you want to install Quality Pack patch bundle. You can download it from:

http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=QUALITYPACK

Regards,
Zygmunt

[Zygmunt Krawczyk · Accepted solution]

You can also install Hardware Enablement patch bundle:

http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B3782HWE

and new Diagnostics subsystem:

http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

Regards,
Zygmunt

[Igor Sovin]

Hi!

I have already installed QPK, I need some patches for Secure Path 3.0D product, but I dont know where to get them.

[Zygmunt Krawczyk]

Patches for SecurePath for HP-UX are at:

http://h18006.www1.hp.com/products/sanworks/softwaredrivers/securepath/sphpuxv30d.html

Regards,
Zygmunt

[Alzhy]

Igor,
Unfortunately I already deleted my list of patches for Sp 3.0D. MOST of the patches that the install will complain about are either superseded or "withdrawn" ones. What I did was for each patch that the installer requires, I went out to ITRC and download the latest or more current patch. I then bundled it and applied it BEFORE installing/upgrading SecurePath 3.0D.


Warning!! Never Ignore the required patches or the superseding ones...


HTH.

[Zygmunt Krawczyk]

Hi Igor,

if you have Secure Path 3.0D, you don't need patches for this product. You need patches for HP-UX. Below is the list of patches you need:

PHKL_30219 1.0 early dump,CDUMP,dump menu and messages,EVA
PHCO_27120 1.0 umount(1M) cumulative patch
PHKL_30622 1.0 LVM Cumulative Patch; 16 node SLVM cluster
PHKL_30605 1.0 VxVM,EMC,PM,vPar,slpq1,KRS,CDUMP,LVM,VM,DaS
PHKL_30557 1.0 ufalloc;VxFS3.5;SPP fragmentation;AIO;EVP

These patches are available from ITRC.

Regards,
Zygmunt

[Dave Unverhau_1]

Igor,

You might want to take advantage of a relatively new feature of the ITRC -- you can now download patch sets for most HP-UX products and subsystems. Here's what you want to do:

1- Go to the ITRC main page (http://itrc.hp.com)

2- Click the link labeled "patch database"

3- Click the link labeled "find HP-UX patches in a patch set -new- "

4- Use the drop-down menus to select the O/S version and software product for which you want patches (11.11, secure path). I would leave the strategy at the default of "conservative".

5- Click the "search" button and you should see a list of about 20 patches. You can now download this as a gzipped tar package.

6- Click the button labeled "add to selected patch list". You will see (at this point in time) a message about a warning on one of the patches in the bundle. You might want to check out the warning. (I personally doubt that this warning represents a significant problem, but it's always good to familiarize yourself with warnings and special instructions.)

7- Once you click the "continue" button, you'll get the download screen. Select your preferred download method and you should be all set!

From here on, you follow the instructions for downloading any set of patches from the ITRC.

Best Regards,

Dave