Secure Path Upgrade

[Greg Hall]

Hi,

HPUX 11.11. Secure Path 3.0E. EVA 5000.

I will be upgrading to Secure Path 3.0F shortly. Are there any known problems? Will the LUN device names change? I have read the rel notes and install manual and they seem to be ambiguous on this point.

I will also be doing this on other systems from Sec Pth 3.0C. Any difference ?

thanks, greg

[Ranjith_5]

It was fine with my case..there were no problems as such.

Regards,
Syam

[Nguyen Anh Tien]

Recommend: check and install all required patches for Secure Path 3.0F . IT will be ok

[Greg Hall]

Thanks people, thats encouraging. I have all the required patches and will be applying them first.

cheers, Greg

[Cem Tugrul]

Greg,
As Syam&Tien mentioned normally no faced
problems so just take care on required patches.

Good Luck,

[Cem Tugrul]

The link as below not directly concern with you but it may gives you how important required patches for you hp-box while installing&upgrading Secure Path...

Good Luck,

[Cem Tugrul]

oppss..here is the link;

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=757861

[Greg Hall]

thanks,

upgarde went smoothly. Except for stupid san switch failing at the time. See new thread opened today :)

Greg