Server OS requirements

[giriplug]

Hi guys,

Just would like to know where to get information or documents relating servers min and max os requirements?For eg.
what is the min and max OS requirement for an n class or k class?

thx in advance...

[Arunvijai_4]

Hello,

One way of finding out is, Go to http://docs.hp.com and look for the installation guide for the specific OS, it has a section called "Supported servers", for example,

http://docs.hp.com/en/5991-2701/ch02s03.html

This is for 11iV2 Dec'05.

-Arun

[Senthil Kumar .A_1]

Hi Nelanraj,


Please find some loads of info below.

http://docs.hp.com/en/hw.html

HP has nearly stopped naming the servers in term's of classes. Nowadays its all about "RPxxxx" for Pa- risc based systems and "RXxxxx" for Itanium processor based systems.

I would also strongly recommend going through the following site as well for cross reference.

http://www.openpa.net/

Rehards,
Senthil Kumar .A

[Steve Steel]

Hi

http://www.hp.com/products1/servers/HP9000_family_overview.html


It may be in discontinued but it should be there


Steve Steel

[giriplug]

hi guys ...

just a quick one...can N class support 10.20 and will there be any problem if 10.20 being installed on a n4000/rp7400???

thx