Service Guard using Veritas

[MikeL_4]

We are implementing Service Guard on nodes with Veritas for VG/FS control.

Attached is the document we used for testing the movement of VG's between servers using HP/LVM.

Is there any procedures for doing this under Veritas ?

[Sridhar Bhaskarla · Accepted solution]

Hi Mike,

I suggest you look at this document

http://docs.hp.com/hpux/onlinedocs/B3936-90065/B3936-90065.html

Section "Creating a Storage Infrastructure with VxVM"

It covers both LVM and VxVM setups under Serviceguard.

-Sri

[Sanjay_6]

Hi Mike,

I've not used vxvm with SG. We primarily use lvm on all hp servers.

Here is a lisk from hp docs site which tells about the procedure to usevxvm with sg,

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B3936-90079/B3936-90079_top.html&con=/hpux/onlinedocs/B3936-90079/00/00/37-con.html&toc=/hpux/onlinedocs/B3936-90079/00/00/37-toc.html&searchterms=vxvm&queryid=20041015-082526

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B3936-90079/B3936-90079_top.html&con=/hpux/onlinedocs/B3936-90079/00/00/90-con.html&toc=/hpux/onlinedocs/B3936-90079/00/00/90-toc.html&searchterms=vxvm&queryid=20041015-082526

Refer to the sg doc on hp docs site, pick the version you are working on.

http://docs.hp.com/hpux/ha/index.html#ServiceGuard

Hope this helps.

Regds

[MikeL_4]

Thanks