1755504 Members
3530 Online
108834 Solutions
New Discussion юеВ

Re: Serviceguard log

 
harsr
Advisor

Serviceguard log

My syslog contains these messages

cmcld: Timed out node PRNAVDB2. It may have failed.
cmcld: Attempting to adjust cluster membership
cmcld: Beginning standard partial election
cmcld: Unable to connect to IP address 172.16.1.2 and port 5300
cmcld: The error status reported is: Can't assign requested address
cmcld: Clearing Cluster Lock
cmcld: Communication to node PRNAVDB2 has been interrupted

Can anyone please suggest me what is this . Is this due to any incorrect timing parameters settings.

Regards

4 REPLIES 4
AwadheshPandey
Honored Contributor

Re: Serviceguard log

Steven E. Protter
Exalted Contributor

Re: Serviceguard log

Shalom hasr,

You have a network conflict. The address is not compatible or in use. You need to re-do your network planning and then check and apply the package to the cluster.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Mustafa Gulercan
Respected Contributor

Re: Serviceguard log

check the ident service at /etc/inetd.conf;

ident stream tcp wait bin /usr/lbin/identd identd
freddy_21
Respected Contributor

Re: Serviceguard log

first thing:
1. is your server down at that time?
1. check your network configuration
look at /etc/services, is ur port 5300 already open
2. ping to 172.16.1.2 from your pc. it is connected?
3. please run this command:
# netfmt -f nettl.LOG000
is there network problem bad cable connection at that time of problem happen

regards
freddy