setting noproxy_uid and noproxy_gid

[R Fleck]

I'm trying to set the noproxy values as described in section 22.1.3
HP TCP/IP Services for OpenVMS Management
and I'm getting these error messages.

TCPIP> SET NFS_SERVER /GID_DEFAULT=-2
error: 'sysconfig -r nfs' - Attribute 'noproxy_gid' is not a number or string,
interactive update not supported.

TCPIP> SET NFS_SERVER /uiD_DEFAULT=-2
error: 'sysconfig -r nfs' - Attribute 'noproxy_uid' is not a number or string,
interactive update not supported.
Any ideas?

I've also tried the method described in section
22.12
creating the file TCPIP$NFS_SERVER_SYSTARTUP.COM
stopping and starting the nfs server with no luck.

TCPIP> sysconfig -q nfs
nfs:
mountd_option_a = 0
mountd_option_d = 0
mountd_option_i = 0
mountd_option_n = 1
mountd_option_s = 0
noproxy_enabled = 0
noproxy_uid = 0
noproxy_gid = 0
tcp_idle_timeout = 300
tcp_threads = 8
udp_threads = 8
vms_bfs_error_print = 0
vms_exception_flag = 0
vms_nfs2_read_max = 8192
vms_nfs2_read_mult = 512
vms_nfs2_write_max = 8192
vms_nfs2_write_mult = 512
vms_nfs3_readdir_pref = 8192
vms_nfs3_read_max = 32768
vms_nfs3_read_mult = 8192
vms_nfs3_read_pref = 32768
vms_nfs3_write_max = 32768
vms_nfs3_write_mult = 8192
vms_nfs3_write_pref = 32768

show version

Compaq TCP/IP Services for OpenVMS VAX Version V5.1
on a VAXserver 3900 Series running OpenVMS V7.3

Thanks in adavance
Rich

[Kent Ostby]

Take a look and see if this helps.

http://ftp.support.compaq.com.au/pub/ecoinfo/ecoinfo/969.htm