setting up a non-hp printer

[Kirk Solano]

hello...I've got an HP-UX 10.20 server. I have printers that I've setup before through jetadmin in hp, but these printers were attached to hp jetdirect boxes. The problem that I am faced with is trying to setup a Xerox Document Centre 220st that has it's own built in network card. Is it possible for me to setup this printer on my server? Or does it need to be an HP product? Do I need to attach it to a jetdirect box? How would I go about doing it? Thanks in advance.

[Jeff Machols]

Our Xerox Docucenters have there own admin tool called xpadmin, that contains all the drivers and the setup tool. Not all DocuCenters need them, but you may want to check on that

[Rainer von Bongartz]

set it up using SAM as a remote printer:


You only need to know the 'remote printer name' which might come from your CANON documentation.
If not known try 'internal'

Regards
Rainer

[Sanjay_6]

Hi Kirk,

Try these links,

http://us-support2.external.hp.com/cki/bin/doc.pl/sid=713dc09308607c9002/screen=ckiDisplayDocument?docId=200000024603265

http://www.hp.com/cposupport/networking/support_doc/bpj05559.html

Hope this helps.

Regds

[Krishna Prasad]

We set them up as remote printers when we have this situtation.

[D. Jackson_1]

Kirk -
See if this thread may help:http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x56dbf715edc6d5118ff10090279cd0f9,00.html

Good luck!