site replication between 2 hp-ux service guard clusters

[meekrob]

Hi All just a question,

can anyone shows the procedure to implement a site replication between 2 distant hp-ux service guard clusters?

Thanks in advance

[Patrick Wallek]

This is usually done at the disk array level.  The procedure will depend on the type of disk array you have and the software used.  Each array vendor has their own software for doing this.

[meekrob]

In fact,  I will have an EVA 4400 as the disk array type. Any further info (if any white papers exist on this subject) will be helpful for me.

Many Thanks in advance

[Patrick Wallek]

For the EVA disk arrays, a product called "Continuous Access EVA" is required to do array-to-array replication.

Information on the product can be found here:

HP Continuous Access EVA Software - Overview & Features

http://h18006.www1.hp.com/products/storage/software/conaccesseva/index.html

Documentation for the Continuous Access EVA Software is here:

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=101&prodClassId=-1&contentType=SupportManual&docIndexId=64255&prodTypeId=18964&prodSeriesId=471572

[meekrob]

Thanks for the info however, i need more details on how to implement and configure this product.

It will be helpful if i can find such documentation.

Regards

[Patrick Wallek · Accepted solution]

That information should be available in some of the manuals in the 2nd link I gave above.

[meekrob]

OK then i will start reading

Many Thanks for your help.

Thread considered closed.