SNMP defaults

[Dean Hartman]

Question from a colleague:

Are the MIBs for HPUX's snmp setup run read-only be default or does it require intervention on the admin's part to set it
that way?

[Hemanth Gurunath Basrur · Accepted solution]

Hi,

Refer to this doc for info.

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/J2768-90011/J2768-90011_top.html&con=/hpux/onlinedocs/J2768-90011/00/00/69-con.html&toc=/hpux/onlinedocs/J2768-90011/00/00/69-toc.html&searchterms=MIBs%7cSNMP&queryid=20031020-121223

I would recommend that you can search for SNMP MIBs in http://docs.hp.com and pick the required doc according to your needs.

Regards,
Hemanth