Operating System - HP-UX
1847165 Members
6315 Online
110263 Solutions
New Discussion

Re: Software Distributor Problem

 
EMILIO ARIAS_1
Advisor

Software Distributor Problem

How could it create a depot in tape with the product hp-ux "Support Tool Manager for s800 systems" (Sup-Tool-Mgr-800 B.10.20.11.08) installed in a k380 server?Which its it could be the ". psf" file?
Many thanks in advance.
Mersault
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: Software Distributor Problem

Do you want to create a depot from the installed software?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
EMILIO ARIAS_1
Advisor

Re: Software Distributor Problem

Yes Thorsten. That's correct.How can i do?
Mersault
Dennis Handly
Acclaimed Contributor

Re: Software Distributor Problem

>Torsten: create a depot from the installed software?

>How can i do?

You have your work cut out for you. You must create a .psf file.

You can see my hand waving in:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1135758

And mention of swpackage:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1115587
Torsten.
Acclaimed Contributor

Re: Software Distributor Problem

Maybe this link can help you to find the original depot:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1141355

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!