ssh issue

[DW1234]

I have a test server that I am unable to ssh to although sshd and inetd are up. Any thoughts?

[Bill Hassell]

Perhaps a better description of 'unable' would help. Can you ping by IP address? by hostname? What error messages do you see? What happens when you run ssh -vvv remoteHost? What is your server's model and OS version? Did you install the HP OpenSSH package or build it yourself? What version is ssh on your local system? Are you trying to use a PC for ssh? If so, what program are you using for ssh?

[DW1234]

Hi Bill,
I am able to ping by IP address as well as hostname. When I try to ssh to the server from another HPUX box, I get 'connecting to failed: TCP/IP Failure. Server OS/B.11.11 U 9000/800.

[blu.karthi]

privide the bellow output
swlist | grep -i "Secure Shell"

ps -ef | grep -i ssh
netstat -an | grep -i 22

[madhuchakkaravarthy]

hi


check this

#grep-i PermitRootLogin /opt/ssh/etc/sshd_config

output :

#PermitRootLogin yes

regards

MC

[DW1234]

ps -ef | grep ssh
root 20331 27671 1 08:54:05 ttyp3 0:00 grep ssh
root 1993 26215 0 08:28:25 ? 0:00 /appl/uas/ssh_3.2.3/sbin/sshd2
root 26215 1 0 08:18:21 ? 0:00 /appl/uas/ssh_3.2.3/sbin/sshd2
root 13649 26215 0 08:43:30 ? 0:00 /appl/uas/ssh_3.2.3/sbin/sshd2
root 20643 1 0 Apr 21 ? 0:08 /appl/uas/ssh_3.2.3/sbin/sshd2
---------------------
No output for swlist | grep -i "secure shell"

[Steven E. Protter]

Shalom,

try ssh -vvv to the server.

Post the output.

SEP

[Bill Hassell]

I looks like you have a non-standard ssh installed in /appl (also a non-standard location). If you have a lot of extra time on your hands, you can poke around in the /appl/uas directories to figure out hwat this is and how where it is configured. You may even have a non-standard port (not 22) configured on this server. I assume nobody remembers (or wrote down) how/why this was setup like this.

[DW1234]

Thanks everyone for the quick reponses.

[DW1234]

Issue was due to low swap space.