standby lan down

[tigerhxy]

i had check the status of a cluster ,then i found that all of the standby lan were down. zhjs_2#[/]cmviewcl -v

CLUSTER STATUS
zhjs_new up

NODE STATUS STATE
zhjs_1 up running

Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY up 0/0/10/0/0 lan0
PRIMARY up 1/0/1/0/0/4/ lan1
STANDBY down 1/0/4/0/0 lan2

PACKAGE STATUS STATE AUTO_RUN NODE
oracle up running enabled zhjs_1

Policy_Parameters:
POLICY_NAME CONFIGURED_VALUE
Failover configured_node
Failback manual

Script_Parameters:
ITEM STATUS MAX_RESTARTS RESTARTS NAME
Subnet up 139.191.1.0

Node_Switching_Parameters:
NODE_TYPE STATUS SWITCHING NAME
Primary up enabled zhjs_1 (current)
Alternate up enabled zhjs_2

NODE STATUS STATE
zhjs_2 up running

Network_Parameters:
INTERFACE STATUS PATH NAME
PRIMARY up 0/0/10/0/0 lan0
STANDBY down 1/0/4/0/0 lan2
PRIMARY up 1/0/1/0/0/4/ lan1 in the syslog,i found some notes of lan2 Apr 3 13:51:37 zhjs_1 vmunix: igelan2: APA NOT SUPPORTED on HP A6847-60101 PCI 1000Base-SX Adapter at hardware path 1/0/4/0/0
Apr 3 13:51:37 zhjs_1 vmunix: igelan2: INITIALIZING HP A6847-60101 PCI 1000Base-SX Adapter at hardware path 1/0/4/0/0
Apr 3 13:53:42 zhjs_1 cmcld: lan2 0x00306e4a5595 standby bridged net:1
Apr 3 13:53:43 zhjs_1 cmcld: lan2 failed what's happened ?

[Deepak Kr]

Seems something wrong with lan card.

run ioscan -fnC lan

also

check the connectivity using linkloop.

[melvyn burnard]

you need to verify the lan2 on each node, check cabling, switch ports etc.
Also, check your files in /etc/rc.config.d and see if there is a configuraion set to use lan2 in an APA aggregate, if so the message is showing you it is unsupported