Steps to Configure Internal RAID Controller

[Tonya Underwood]

Itanium server Internal RAID Config.

Does anyone have the steps required for this? Obviously I will reignite post-RAID controller setup.

sasmgr/drvcfg procedure

THANKS,
Tonya


ba 7 0/4 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
escsi_ctlr 0 0/4/1/0 sasd CLAIMED INTERFACE HP PCI/PCI-X SAS MPT Adapter
/dev/sasd0
ext_bus 0 0/4/1/0.0.0 sasd_vbus CLAIMED INTERFACE SAS Device Interface
target 0 0/4/1/0.0.0.0 tgt CLAIMED DEVICE
disk 0 0/4/1/0.0.0.0.0 sdisk CLAIMED DEVICE HP DH072ABAA6
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
target 1 0/4/1/0.0.0.1 tgt CLAIMED DEVICE
disk 1 0/4/1/0.0.0.1.0 sdisk CLAIMED DEVICE HP DH072ABAA6
/dev/dsk/c0t1d0 /dev/rdsk/c0t1d0
target 2 0/4/1/0.0.0.2 tgt CLAIMED DEVICE
disk 2 0/4/1/0.0.0.2.0 sdisk CLAIMED DEVICE HP DH072ABAA6
/dev/dsk/c0t2d0 /dev/rdsk/c0t2d0
target 3 0/4/1/0.0.0.3 tgt CLAIMED DEVICE
disk 3 0/4/1/0.0.0.3.0 sdisk CLAIMED DEVICE HP DH072ABAA6
/dev/dsk/c0t3d0 /dev/dsk/c0t3d0s2 /dev/rdsk/c0t3d0 /dev/rdsk/c0t3d0s2
/dev/dsk/c0t3d0s1 /dev/dsk/c0t3d0s3 /dev/rdsk/c0t3d0s1 /dev/rdsk/c0t3d0s3

[Torsten.]

You can create 2 sets of mirrored pairs + 1 hotspare.

This is an offline procedure and will delete any data on the disk.

http://docs.hp.com/en/J6369-90070/J6369-90070.pdf

[George Genov]

Hi,

Please see the following link:
http://docs.hp.com/en/J6369-90070/index.html
I hope it will helpfull to you ;-)

BR

George

[Aashique]

Hi,
Yes you can follow the George Linked below. its very helpful.
http://docs.hp.com/en/J6369-90070/index.html

Thanks

Aashique

[Torsten.]

The answer won't become better even if five more people will post the same link ... ;-)