Operating System - HP-UX
1849854 Members
3114 Online
104044 Solutions
New Discussion

steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

 
Hanry Zhou
Super Advisor

steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

Any suggestion on detailed steps?

Also what command to tell me what version of SG I'm runing?

Thanks,
none
12 REPLIES 12
Isralyn Manalac_1
Regular Advisor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

Hi Hanry,

Look for the SW recovery handbook containing the steps to update 11 to 11i either here in ITRC or in docs.hp.com. FOr the SG upgrade, look for "Managing SG" manual in docs.hp.com.

To determine SG version, you can do either:

#swlist -l product|grep SG

or

#what /usr/sbin/cmcld

Regards,

Isralyn
Patrick Wallek
Honored Contributor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

Upgrading 11.0 to 11i (RTFM - read the fine manual) -

HP-UX 11i Version 1 Installation and Update Guide
HTML version - http://www.docs.hp.com/en/5991-0662/index.html
PDF version - http://www.docs.hp.com/en/5991-0662/index.html

For upgrading MC/SG refer to the "Managing Serviceguard Version A.11.16, Eleventh Edition" manual and have a look at "Appendix E Rolling Software Upgrades"
HTML version - http://www.docs.hp.com/en/B3936-90079/index.html
PDF version - http://www.docs.hp.com/en/B3936-90079/B3936-90079.pdf

All the information you require should be in those 2 manuals.
Hanry Zhou
Super Advisor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

I did: what /usr/lbin/cmcld
and got the following messages. So what version of SG we are using? Is it A.11.12? I am not aware of this version, can this version work with HPUX 11i. Currently this box is running 11.0
=================

/usr/lbin/cmcld:
HP92453-02A.10.20 HP-UX SYMBOLIC DEBUGGER (END.O) $Revision: 74.03 $
Build date: Wed Feb 13 09:35:04 PST 2002
Build id: ibld_sgops_a1112_patch
A.11.12 Date: 02/11/2002; PATCH: PHSS_26270

...
none
Patrick Wallek
Honored Contributor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

To find the exact version of MC/SG you are using:

# swlist -l bundle | grep -i service

and look for the ServiceGuard line.
melvyn burnard
Honored Contributor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

You are running 11.12 of Serviceguard, no longer supported.

A.11.12 Date: 02/11/2002; PATCH: PHSS_26270
^^^^^^^
If you are looking at upgrading to 11i, you should first upgrade Serviceguard to 11.14 as 11.12 was never supported on 11i of HP-UX
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Hanry Zhou
Super Advisor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

I acutally have a cluster with 2 nodes, both are running hpux11.0/SG A.11.12.

We plan to upgrade it to hpux11.i and the best version of SG we can have. Now, the question is, should I do the upgrade to both hpux and SG, or should I do the completely installation of hpux and sg.

We no longer need any applications running on the cluster.
none
Patrick Wallek
Honored Contributor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

If you are ABSOLUTELY SURE you don't need anything from the cluster, I would just blow away everything and start completely from scratch.

Install 11i from scratch and install MC/SG. Then build your new cluster from there.
Hanry Zhou
Super Advisor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

What is highest SG version I can go on hpux 11i server?
none
Patrick Wallek
Honored Contributor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

The most current version for HP-UX 11.11 is A.11.16.00.

ServioceGuard for HP-UX 11iV1 (11.11):
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B3935DA

ServioceGuard for HP-UX 11iV2 (11.23):
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T1905BA
Hanry Zhou
Super Advisor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

Patrick,

I checked the link you posted. It says SG 11.16 can work on hpux 11i v2. What is 11i v2? I thought there should be only 11i.

I have N4000-55, and N4000-44 what version of 11i I should go, v1 or v2?

Thanks,
none
Jim Mallett
Honored Contributor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

Hanry,

You're likely on V1, or 11.11. Run something along the lines of: uname -sr to see what exact version you are on. Patrick posted links for both, you'll probably need the first.

(Patrick, you mentioned you are doing the Technology forum, are you also doing HP World?)

Jim
Hindsight is 20/20
Patrick Wallek
Honored Contributor

Re: steps to upgrade hpux 11.0 to 11i and also serviceguard 11.0x to 111x

Well, your media should actually tell you what version. I'm looking at a set of applications CDs and they say very distinctly "11i version 1" which is also known as 11iV1 or 11.11.

11iV2PI, or 11i Version 2 Sep. 2004, or 11i Version 2 PI, or 11.23PI is the newest version. As of Sept. 2004 it can run on both PA-RISC and Itanium hardware.

You'll really need to research and look at your materials to determine what version you have and what version of MC/SG you need!


(Aside to Jim -- I probably won't do HP World. I'm going to try and let my counterpart here go to that one.)