strange error

[Meirone Luca]

INIT: Command is respawning too rapidly.
Will try again in 5 minutes.
Check for possible errors.
id: sfd "/sbin/sfd"

anyone can help me about this error

thanks, best regards LUCA

[Paula J Frazer-Campbell]

Hi

Where as you seeing this error?

Try:-
init q

And monitor

See man init.

Paula

[Olav Baadsvik]

Hi,

Check in /etc/inittab if it has getty
entries that should not be there.

Regards
Olav

[steven Burgess_2]

Hi

I had a similar message last week which turned out to be a disk/loss of data issue -

Have at look through the replies to see if any of them will resolve your issue

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x89b33a7b3682d611abdb0090277a778c,00.html

Hope this helps

Steve

[PIYUSH D. PATEL]

Hi,

Check out for the entry /sbin/sfd in /etc/inittab file.

There could be some corruption with this file or some problem with the commands in this script.

Any changes were made ???

Piyush

[barrett cooper]

If you are running 11.11 you may want to check for PHCO_23920. It is a sfd patch that may help especially if this is a newly loaded OS.

[Sanjay_6]

Hi,

If this is a 11i system you may want to look at the patch PHCO_23920

http://support2.itrc.hp.com/service/patch/patchDetail.do?patchid=PHCO_23920&context=hpux:800:11:11

Hope this helps.

Regds