1834027 Members
4263 Online
110063 Solutions
New Discussion

Support for A6795A

 
David du Plessis
Occasional Advisor

Support for A6795A

I have installed a A6795A PCI Tachyon XL2 Adapter on an A-Class server model A500-5X (rp2450) running HP-UX 11i. Have installed 43.50 PDC Firmware Patch but the system just does not see the device. The device appears to be active as the light are on, on the card. Can anyone help me out please.
7 REPLIES 7
Michael Tully
Honored Contributor

Re: Support for A6795A

First, does the card appear in the ioscan output even if it states 'unknown'?

Second, what slot do you have the card in and what other cards do you have in the other slots?

If it is 'unknown' you will still need to install the FC-MASS-Storage filesets and the latest driver. By default if a HBA card has not been installed before, the drivers need to be loaded later.
Anyone for a Mutiny ?
David du Plessis
Occasional Advisor

Re: Support for A6795A

The card is shown in the ioscan.
unknown 0 0/2/0/0 td UNCLAIMED UNKNOWN PCI-X SerialBus (10772312)
unknown -1 0/2/0/1 UNCLAIMED UNKNOWN PCI-X SerialBus (10772312)

The driver was initially btlan but I force it to be td.

The card is in slot 1 (0/2/0) and when I issued a swlist -l fileset I see the FCMassStorage files.
Slot 2 has a A5838
Slot 3 has a A5149
Slot 4 has a A5509
Michael Tully
Honored Contributor

Re: Support for A6795A

Seeing it is actually listed and unknown/unclaimed, you may still need to install the FCMassStorage filesets from your CORE-OS CD. This will place the correct drivers into the kernel.
e.g.
# swlist -l product | grep FC
FC-TACHYON-TL B.11.23.01 PCI FibreChannel;Supptd HW=A6795A,A5158A
FCMassStorage B.11.23 Fibre Channel Mass Storage

After install, you will still need the latest driver which can be found here:
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=A6795A
Anyone for a Mutiny ?
David du Plessis
Occasional Advisor

Re: Support for A6795A

All the software seems to be installed but I have reinstalled all the necessary filesets again but when I issue the ioscan it remains the same.
Bharat Katkar
Honored Contributor

Re: Support for A6795A

Hi,
Did you reboot the server after installing the Software... if not and if possible try rebooting it once..
Regards,
You need to know a lot to actually know how little you know
Thayanidhi
Honored Contributor

Re: Support for A6795A

Hi,

In application cd1 try to find a product A6795A and install them with reinstall=true option.

TT
Attitude (not aptitude) determines altitude.
David du Plessis
Occasional Advisor

Re: Support for A6795A

System has been rebooted and software installed