swinstall -s er

[mulder20]

Please , i try to install Virtual Server Environment V4 on hpux 11iv31 using root
i try by swinstall -s /opt/vse/depot...
and also using sam

i get the same error

ERROR: "danty:/": You do not have the required permissions to
select this target. Check permissions using the "swacl"
command or see your system administrator for assistance. Or,
to manage applications designed and packaged for nonprivileged
mode, see the "run_as_superuser" option in the "sd" man page.
* Target connection failed for "danty:/".
ERROR: More information may be found in the daemon logfile on this
target (default location is
danty:/var/adm/sw/swagentd.log).
* Selection had errors.
Many thanks for your help in advance,

[Shomsa]

Hi,

Start by checking whether you login as root. mostly root user have the permission to alter the software.

[Robert-Jan Goossens]

Hi,

Check if you can resolve your hostname and ip-address.

# nslookup danty
# nslookup ip_of_danty
both commands should give the same result.

Check your /etc/nsswitch.conf and /etc/hosts file for errors. If you change something in the configuration restart the swagentd.

#/sbin/init.d/swagentd stop
#/sbin/init.d/swagentd start

Regards,
Robert-Jan

[mulder20]

# nslookup danty ok
# nslookup ip_of_danty ok
/etc/nsswitch.conf wasn't there so i created and put in hosname

/etc/hosts is ok
stop and start swagentd # /sbin/init.d/swagentd stop
The swagentd daemon is stopped.
# /sbin/init.d/swagentd start


but i still get error

BTW i use root to install this software

thanks for your help

[Asif Sharif]

Hi Mulder,

Follow the instructions to solve the issue.

1.Login as root

2.Stop swagentd
#/sbin/init.d/swagentd stop

3.Verify swagentd has stopped:
#ps -ef|grep swagentd

4.Change directory to /var/adm/sw:
#cd /var/adm/sw

5.Move the directory /var/adm/sw/security and its contents:
#mv security security.orig

6.Copy the directory and its contents
from /usr/newconfig/var/adm/sw/security to /var/adm/sw/security
#cp - Rp /usr/newconfig/var/adm/sw/security /var/adm/sw/security

7.Start swagentd:
#/sbin/init.d/swagentd start

8.Verify swagentd has started:
#ps -ef|grep swagentd


Proceed with swinstall operation.


If ACLs are in use,move the original/var/adm/sw/security directory backin
place.

9.Change directory to/var/adm/sw:
#cd/var/adm/sw
#mvsecurity/tmp
#mvsecurity.origsecurity

10.Stop and restart swagentd:
#/sbin/init.d/swagentd stop
#/sbin/init.d/swagentd start

Regards,
Asif Sharif

[mulder20]

Thnk you very much for the detail :
i do step 1 to 8
and i try swinstall , i get the same error

"lvi64096:/": You do not have the required permissions to select â â â â
â â â this target. Check permissions using the "swacl" command or see your â ^ â
â â â system administrator for assistance. Or, to manage applications â â
â â â designed and packaged for nonprivileged mode, see the â â
â â â "run_as_superuser" option in the "sd" man page.


should i do next step 9 ,......?

thanks
Mulder

[mulder20]

Hello ,

please any suggestion about swinstall error ?

i still get the error when i want to use swinstall or swlist ....


here the detail error.



Sat, Jun 7, 2008 02:32:25 PM EDT BEGIN swagentd (pid =
19867).

* Registered RPC protocol "ncacn_ip_tcp" with endpoint "2121".
* Registered RPC protocol "ncadg_ip_udp" with endpoint "2121".
WARNING: An attempt to get the network host entry for "lvi64096"
failed. This may result in denial of access to users and
agents at this host. Check the spelling of this name, then
your "/etc/hosts" file, or your "/etc/resolv.conf" file and
DNS resolver configuration. The nslookup program may be
helpful in isolating this problem.
* Checking job queue at 1 minute intervals.
ERROR: Could not obtain the caller's authentication information from
the RPC call received from host 127.0.0.1. This is an
internal SD error if SD "internal" authentication is in use,
or a DCE configuration error if "dce_secret" authentication is
in use.
ERROR: Access denied to start install agent on /. No user
authenticated. Sat, Jun 7, 2008 02:32:41 PM EDT

======= 06/07/08 16:00:01 EDT BEGIN swagentd (pid = 20947).

* Stopping swagentd program, process ID 19867.

======= 06/07/08 16:00:01 EDT END swagentd (pid = 20947).


======= Sat, Jun 7, 2008 04:00:01 PM EDT END swagentd (pid = 19867).


======= Sat, Jun 7, 2008 04:10:05 PM EDT BEGIN swagentd (pid =
21108).

* Registered RPC protocol "ncacn_ip_tcp" with endpoint "2121".
* Registered RPC protocol "ncadg_ip_udp" with endpoint "2121".
WARNING: An attempt to get the network host entry for "lvi64096"
failed. This may result in denial of access to users and
agents at this host. Check the spelling of this name, then
your "/etc/hosts" file, or your "/etc/resolv.conf" file and
DNS resolver configuration. The nslookup program may be
helpful in isolating this problem.
* Checking job queue at 1 minute intervals.
ERROR: Could not obtain the caller's authentication information from
the RPC call received from host 127.0.0.1. This is an
internal SD error if SD "internal" authentication is in use,
or a DCE configuration error if "dce_secret" authentication is
in use.
ERROR: Access denied to start install agent on /. No user
authenticated. Sat, Jun 7, 2008 04:11:42 PM EDT
ERROR: Could not obtain the caller's authentication information from
the RPC call received from host 127.0.0.1. This is an
internal SD error if SD "internal" authentication is in use,
or a DCE configuration error if "dce_secret" authentication is
in use.
ERROR: Access denied to start install agent on /. No user
authenticated. Sat, Jun 7, 2008 04:12:38 PM EDT
ERROR: Could not obtain the caller's authentication information from
the RPC call received from host 127.0.0.1. This is an
internal SD error if SD "internal" authentication is in use,
or a DCE configuration error if "dce_secret" authentication is
in use.
ERROR: Access denied to start install agent on /. No user
authenticated. Sat, Jun 7, 2008 07:35:33 PM EDT
ERROR: Could not obtain the caller's authentication information from
the RPC call received from host 127.0.0.1. This is an
internal SD error if SD "internal" authentication is in use,
or a DCE configuration error if "dce_secret" authentication is
in use.
ERROR: Access denied to list socs on host. No user authenticated.
Sat, Jun 7, 2008 11:06:03 PM EDT
ERROR: Could not obtain the caller's authentication information from
the RPC call received from host 127.0.0.1. This is an
internal SD error if SD "internal" authentication is in use,
or a DCE configuration error if "dce_secret" authentication is
in use.
ERROR: Access denied to register soc on host. No user authenticated.
Sat, Jun 7, 2008 11:06:03 PM EDT
ERROR: Could not obtain the caller's authentication information from
the RPC call received from host 127.0.0.1. This is an
internal SD error if SD "internal" authentication is in use,
or a DCE configuration error if "dce_secret" authentication is
in use.
ERROR: Access denied to list socs on host. No user authenticated.
Sat, Jun 7, 2008 11:07:32 PM EDT
ERROR: Could not obtain the caller's authentication information from
the RPC call received from host 127.0.0.1. This is an
internal SD error if SD "internal" authentication is in use,
or a DCE configuration error if "dce_secret" authentication is
in use.
ERROR: Access denied to list socs on host. No user authenticated.
Sat, Jun 7, 2008 11:11:48 PM EDT
ERROR: Could not obtain the caller's authentication information from
the RPC call received from host 127.0.0.1. This is an
internal SD error if SD "internal" authentication is in use,
or a DCE configuration error if "dce_secret" authentication is
in use.
ERROR: Access denied to start install agent on /. No user
authenticated. Sun, Jun 8, 2008 12:28:18 AM EDT
:q
#
#




many thanks for your help
Mulder