system information

[Vivek Nandalike]

Hi,
I work on a HP 712/100 Workstation.How can I find system information like which OS version I am running,what is the processor used etc from the console.Are there any GUI tools available to display the same.Also I wold like to know if there are any Media players and image viewers available to run on HPUX.
Thanks in advance,
Cheers,
Vivek

[Rita C Workman]

A very handy place to go is

SAM/Performance Monitors/System Properties
then look under the tabs for what you need

you can also run 'dmesg' for memory info
For a gui interface I like Glance...

Regards,

[Rita C Workman]

Second attempt to send this...

You can use SAM/Performance Monitors/System Properties and then look under each tab for info.

You can run 'dmesg' for mem

For a nice GUI I like Glance and Glance Plus

Regards

[John D. Reaney]

some easy commands

model - will give model
uname -ai will give hostname and os version

or use sam as listed above

[Rainer_1]

Here some software links
ImageViewer: http://hpux.cs.utah.edu/hppd/hpux/X11/Viewers/xv-3.10a/
MPEG audio player: http://hpux.cs.utah.edu/hppd/hpux/Misc/mpg123-0.59r/

[Tony Constantine_1]

Hi Vivek

If you've got ignite installed (which is highly recommended) you can you use the /opt/ignite/print_mainfest command which will give all the info that you need about your server.

[Victor BERRIDGE]

A system 712/100:
Processor=PA-7100
SPECint95/SPECfp95= 3,76/4,03
SPECint91/SPECfp92= 117,2/144,2
(With HPUX10.x)

GUI for Hardware: Install xstm...