system management homepage on J5600

[Asim_5]

i have installed SMH on J5600 os version B.11.23.
Although i have latest version but still unable to get any information regarding installed devices.
i have also configured the snmpd.conf file for community and trap address but none of them work.
would there be any patch to keep it working or anything for it,i know its old system but atleast minimum information should be shown as its in the supported os.
or provide me the supported hardware for it
i am also attaching the file

[Torsten.]

Do not open so many threads for only 1 topic and continue one of the other threads:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1217688

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1217634

Is this really 11.23???

Well, not supported ...

[Asim_5]

You said its not supported.
Means i cannot use system management homepage on j5600 workstation hp-ux B.11.23 installed????
kinldy confirm it as its mentioned in the supported guide.

[Torsten.]

hp-ux 11.23 is not supported on any pa-risc workstation (or any other workstation now) - so any software running on 11.23 is not supported with this system.

[Asim_5]

its working on my j5600 workstation pa-risc machine.
Can u provide me any document for this so that i can document it my side too.
For testing purpose i am using this machine.i also installed SMH on rp3440 but having some problem with it.i am unable to get full information.

find the attached file for rp3440 error

[Dennis Handly]

>Can you provide me any document for this so that i can document it my side too.

From December 2005:
http://docs.hp.com/en/5991-2701/ch02s04.html

[Asim_5]

Last time i had raised the issue for rp3440 having B.11.11 os,i have installed the SMH latest version but getting incomplete information with blue unknown icons.
find the attached file for errors,i have check the WBEM and error logs but not getting any satisfactory result.
anyone help me in this issue regarding