Operating System - HP-UX
1833237 Members
2553 Online
110051 Solutions
New Discussion

System Manangement Home Page Server Could Not Be started Successfully

 
sadakhatri
Visitor

System Manangement Home Page Server Could Not Be started Successfully

Hello Community,

 

 I am facing an issue with my rx2660. I have Fresh Installed HP-UX 11.23. After Installation When i am trying to access SMH via http://localhost:2301. I am getting Error "The System Management Home Page Server Could Not Be Started Successfully. 

 I tried with both ports 2301 and 2381 but the issue is same.

 I tried to replace the .so files from a working server but the issue is same.

 Please Community Suggest me something to resolve this issue.

4 REPLIES 4
Bill Hassell
Honored Contributor

Re: System Manangement Home Page Server Could Not Be started Successfully

Using the working machine as a reference, compare these settings:

 

# ifconfig lan0
cat /etc/resolve.conf
cat /etc/nsswitch.conf

 

>> should read: /etc/resolv.conf <<  Community posts having problems today


This assumes that the main network connection is lan0.



Bill Hassell, sysadmin
sadakhatri
Visitor

Re: System Manangement Home Page Server Could Not Be started Successfully

Hello Bill,

I have compared both .conf files and both are exactly the same.

Can U Suggest any further investigation?

Patrick Wallek
Honored Contributor

Re: System Manangement Home Page Server Could Not Be started Successfully

Have you looked at any log files?  Perhaps /var/adm/syslog/syslog.log or any of the files in the /var/opt/hpsmh/logs directory?  On my system there's an 'error.log' file in the /var/opt/hpsmh/logs directory.  That may be a good place to start.

georgek_1
HPE Pro

Re: System Manangement Home Page Server Could Not Be started Successfully

Hello Patrick,

 

See if there are any errors in /etc/rc.log while starting System Management HomePage server .
You may check if the required smh services are running using ps -ef | grep -i smh .
Also stop start smh using # hpsmh stop ; hpsmh autostart and see if that helps .
Other option is to verify the software using # swverify SysMgmtWeb and see if it reports any errors .

Look at the log file /var/opt/hpsmh/logs/smh.log and see if there are any errors while starting SMH .

 

I work for HPE/ I am an HPE Employee (HPE Community)



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo