system re-boot errors after ignite image installed

[Rob_Taylor]

Hi,
I'm getting the follwoing errors after I installed a cloned IGNITE image on this server.

Ideas?
alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3e900000.
DoCalllist done

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 8190 MB 8190 MB 8190 MB
Kernel : 8190 MB 8190 MB 8190 MB
User : 7619 MB 6639 MB 6665 MB
-------------------------------------------------------------------------

gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: cachefs_link(): File system was registered at index 4.
NOTICE: nfs3_link(): File system was registered at index 7.
igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
igelan1: INITIALIZING HP A9784-60001 PCI/PCI-X 1000Base-T FC/GigE Combo Adapter at hardware path 0/2/1/0/6/0
iether3: INITIALIZING HP A7012-60001 PCI/PCI-X 1000Base-T Dual-port Adapter at hardware path 0/3/1/0
iether4: INITIALIZING HP A7012-60001 PCI/PCI-X 1000Base-T Dual-port Adapter at hardware path 0/3/1/1
iether2: INITIALIZING HP A7012-60001 PCI/PCI-X 1000Base-T Dual-port Adapter at hardware path 0/4/1/0
iether5: INITIALIZING HP A7012-60001 PCI/PCI-X 1000Base-T Dual-port Adapter at hardware path 0/4/1/1

System Console is on the Built-In Serial Interface
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 8388608
Starting the STREAMS daemons-phase 1
Checking root file system.
file system is clean - log replay is not required
Root check done.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B11.23_LR FLAVOR=perf Fri Mar 19 15:24:05 PST 2004 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 8386560 Kbytes, lockable: 6244304 Kbytes, available: 7249396 Kbytes

insf: Installing special files for sdisk instance 0 address 0/0/2/0.0.0.0
insf: Installing special files for sdisk instance 1 address 0/1/1/0.0.0
insf: Installing special files for sdisk instance 2 address 0/1/1/0.1.0
insf: Installing special files for sdisk instance 3 address 0/2/1/0/4/0.97.200.19.0.0.0
insf: Installing special files for sdisk instance 4 address 0/2/1/0/4/0.97.200.19.0.0.3
insf: Installing special files for sdisk instance 5 address 0/2/1/0/4/0.97.200.19.0.0.4
insf: Installing special files for sdisk instance 6 address 0/2/1/0/4/0.97.200.19.0.0.7
insf: Installing special files for sdisk instance 7 address 0/2/1/0/4/0.97.200.19.0.2.3
insf: Installing special files for sdisk instance 8 address 0/2/1/0/4/0.97.200.19.0.2.4
insf: Installing special files for sdisk instance 9 address 0/2/1/0/4/0.97.200.19.0.2.5
insf: Installing special files for sdisk instance 10 address 0/2/1/0/4/0.97.200.19.0.3.5
insf: Installing special files for sdisk instance 11 address 0/2/1/0/4/0.97.200.19.0.3.6
insf: Installing special files for sdisk instance 12 address 0/2/1/0/4/0.97.200.19.0.3.7
insf: Installing special files for sdisk instance 13 address 0/2/1/0/4/0.97.200.19.0.4.0
insf: Installing special files for sdisk instance 14 address 0/2/1/0/4/0.97.200.19.0.4.2
insf: Installing special files for sdisk instance 15 address 0/2/1/0/4/0.97.200.19.0.4.3
insf: Installing special files for sdisk instance 16 address 0/2/1/0/4/0.97.200.19.0.4.4
insf: Installing special files for sdisk instance 17 address 0/2/1/0/4/0.97.200.19.0.4.5
insf: Installing special files for sdisk instance 18 address 0/2/1/0/4/0.97.200.19.0.4.6
insf: Installing special files for sdisk instance 19 address 0/2/1/0/4/0.97.200.19.0.5.4
insf: Installing special files for sdisk instance 20 address 0/2/1/0/4/0.97.200.19.0.5.5
insf: Installing special files for sdisk instance 21 address 0/2/1/0/4/0.97.200.19.0.5.6
insf: Installing special files for sdisk instance 22 address 0/2/1/0/4/0.97.200.19.0.5.7
insf: Installing special files for sdisk instance 23 address 0/2/1/0/4/0.97.200.19.0.6.0
insf: Installing special files for sdisk instance 24 address 0/2/1/0/4/0.97.200.19.0.6.1
insf: Installing special files for sdisk instance 25 address 0/2/1/0/4/0.97.200.19.0.6.2
insf: Installing special files for sdisk instance 26 address 0/2/1/0/4/0.97.200.19.0.6.3
insf: Installing special files for sdisk instance 27 address 0/2/1/0/4/0.97.200.19.0.7.0
insf: Installing special files for sdisk instance 28 address 0/2/1/0/4/0.97.200.19.0.7.1
insf: Installing special files for sdisk instance 29 address 0/2/1/0/4/0.97.200.19.0.7.2
insf: Installing special files for sdisk instance 30 address 0/2/1/0/4/0.97.200.19.0.7.3
insf: Installing special files for sdisk instance 31 address 0/2/1/0/4/0.97.200.19.0.7.4
insf: Installing special files for sdisk instance 32 address 0/2/1/0/4/0.97.229.19.0.1.7
insf: Installing special files for sdisk instance 33 address 0/2/1/0/4/0.97.229.19.0.2.0
insf: Installing special files for sdisk instance 34 address 0/2/1/0/4/0.97.229.19.0.2.1
insf: Installing special files for sdisk instance 35 address 0/2/1/0/4/0.97.229.19.0.2.2
insf: Installing special files for sdisk instance 36 address 0/2/1/0/4/0.97.229.19.0.2.3
insf: Installing special files for sdisk instance 37 address 0/2/1/0/4/0.97.229.19.0.2.4
insf: Installing special files for sdisk instance 38 address 0/2/1/0/4/0.97.229.19.0.2.5
insf: Installing special files for sdisk instance 39 address 0/2/1/0/4/0.97.229.19.0.2.6
insf: Installing special files for sdisk instance 40 address 0/2/1/0/4/0.97.229.19.0.2.7
insf: Installing special files for sdisk instance 41 address 0/2/1/0/4/0.97.229.19.0.3.0
insf: Installing special files for sdisk instance 42 address 0/2/1/0/4/0.97.229.19.0.3.1
insf: Installing special files for sdisk instance 43 address 0/2/1/0/4/0.97.229.19.0.3.2
insf: Installing special files for sdisk instance 44 address 0/2/1/0/4/0.97.229.19.0.3.3
insf: Installing special files for sdisk instance 45 address 0/2/1/0/4/0.97.229.19.0.3.4
insf: Installing special files for sdisk instance 46 address 0/2/1/0/4/0.97.229.19.0.3.5
insf: Installing special files for sdisk instance 47 address 0/2/1/0/4/0.97.229.19.0.3.6
insf: Installing special files for sdisk instance 48 address 0/2/1/0/4/0.97.229.19.0.4.2
insf: Installing special files for sdisk instance 49 address 0/2/1/0/4/0.97.229.19.0.5.3
insf: Installing special files for sdisk instance 50 address 0/2/1/0/4/0.97.229.19.0.5.5
insf: Installing special files for sdisk instance 51 address 0/2/1/0/4/0.97.229.19.0.5.6
insf: Installing special files for sdisk instance 52 address 0/2/1/0/4/0.97.229.19.0.9.1
insf: Installing special files for sdisk instance 53 address 0/2/1/0/4/0.97.229.19.0.9.2
insf: Installing special files for sdisk instance 54 address 0/2/1/0/4/0.97.229.19.0.9.3
insf: Installing special files for sdisk instance 55 address 0/2/1/0/4/0.97.229.19.0.9.4
insf: Installing special files for sdisk instance 56 address 0/2/1/0/4/0.97.229.19.0.10.1
insf: Installing special files for sdisk instance 57 address 0/2/1/0/4/0.97.229.19.0.10.2
insf: Installing special files for sdisk instance 58 address 0/2/1/0/4/0.97.229.19.0.10.3
insf: Installing special files for sdisk instance 59 address 0/2/1/0/4/0.97.229.19.0.10.4
insf: Installing special files for sdisk instance 60 address 0/2/1/0/4/0.97.229.19.0.10.5
Volume group "/dev/vg00" has been successfully changed.
Resynchronized volume group /dev/vg00
WARNING: Could not open default log file: /tmp/ign_configure/log_file: No such
file or directory (errno = 2)
ERROR: phy_unit_init: Could not open file: /tmp/ign_configure/hw.info: No
such file or directory (errno = 2)
WARNING: Could not open default log file: /tmp/ign_configure/log_file: No such
file or directory (errno = 2)
ERROR: read_hw_info failed
WARNING: Could not open default log file: /tmp/ign_configure/log_file: No such
file or directory (errno = 2)

The configuration process has incurred an error, would you like
to push a shell for debugging purposes? (y/[n]):

[Court Campbell]

What was the ignite-ux command you used to created the tape? My first thought is that /tmp did not mount, and it is looking at an empty directory.

[Rob_Taylor]

Godd point but I did exclude the /tmp directory.
Here is the command I used to create the original image:
/opt/ignite/bin/make_net_recovery -Ps -s 192.168.1.1 -x inc_entire=vg00 -x exclude=/var/adm/crash

[Court Campbell]

Are you using VxVM? I know there have been issues with the versions of VxVM and Ignite. Also are you using the latest Ignite? It's C.7.1.

[Rob_Taylor]

Yeah I'm using VxVM and the IGNITE version are all the same.