Tape drive not detecting

[csreenivas]

Hi

Our Tape drive is not detecting using ioscan on HP-UX B.11.00 A 9000/879 machine.

unknown -1 10/4/12.5.0 UNCLAIMED UNKNOWN Quantum DLT4000.

We replaced Tape drive still not detecting.
Mother board crashed recently due to power outage and we replaced new mother board .

Do I need to rebuild kernel for tape?
This is a test server and I have no previous experience in rebuilding kernel, can anyone please suggest me the commands

[Michal Kapalka (mikap)]

hi,

check if you have the "stape" driver loaded in the kernel.

mikap

[csreenivas]

Hi

I can see stape in /stand/system

/home/root> grep tape /stand/system
stape

[singh sanjeev]

try running:

insf -eC tape ,is device file created for tape/

#cd /dev/rmt/ ;ll *

[rariasn]

Hi,

Install "stape" and "tape2" drivers.

rgs,

[S.N.S]

Let Us know after running insf -e or insf -eC tape..

SNS

[csreenivas]

I cannot see tape2 drivers in /stand/system.
Can you please help me how to install tape2 drivers.

# insf -eC tape
#/dev/rmt> ls
#/dev/rmt> ll
total 0

#grep tape /stand/system
stape
# /dev/rmt> grep tape2 /stand/system

[Michal Kapalka (mikap)]

hi,

if its possible to reboot the system, i would recommend to do it.

if not, you could user rmsf -H ( drive path )

ioscan -fnC tape && insf -eC tape

mikap

[csreenivas]

Rebooted couple of times but still I could not see anything in ioscan.

[singh sanjeev]

check error in event.log

/var/opt/resmon/log/event.log for tape...

Is tape deriver is internal to server or connected to libary..if yes then check the connection... if it is through FC

try runing

fcmsutil

[rariasn]

Hi,

http://downloads.quantum.com/dlt4000/HP900_S700_Config.pdf

rgs,

[rariasn]

Hi,

Other documentation,

http://www.quantum.com/ServiceandSupport/SoftwareandDocumentationDownloads/DLT4000/Index.aspx

rgs

[Chandrahasa s]

Hi,

kcmodule | grep -i stape

it should show stape=static

if not use

kcmodule stape=static and reboot

run ioscan -fnC tape

insf

you need to use kmmodule if your os is v1

Chandra

[csreenivas]

Hi

tape drive in not connected to library.
Both kcmodule and kmmodule are not working on this machine.

HP-UX B.11.00 A 9000/879 1447691351 two-user license.

Is something missing on my system.
we are working remotely.

[Torsten. · Accepted solution]

Use SAM -> kernel drivers and add the stape driver, reboot and the tape should be CLAIMED.

[csreenivas]

Thanks for your help.
Now I am able to see the tape drive(claimed).

[csreenivas]

I am able to see the tape drive after rebuilding kernel for tape2 driver.