Telnet device drivers missing

[alymarcor]

I have an HP-UX 11i V2, I have 6 or 8 connections and I try to connect with telnet and I have the message that Device drivers missing. Can you help me?

[Pete Randall]

Try "insf -e".


Pete

[alymarcor]

I try it, but not resolve the problems. Also remove the /dev/pty/t* and /dev/pts/* and recreate the device files but not resolve problem

[Steven E. Protter]

Have you recently changed your instance numbers for scsi devices? Procedures involving /etc/ioinit can cause this problem.

If its kernel related, this thread might help:

http://search.hp.com/redirect.html?url=http%3A//forums1.itrc.hp.com/service/forums/questionanswer.do%3FthreadId%3D224238&qt=%22telnetd%3A+Telnet+device+drivers+missing%3A%22&hit=1

If the drivers got wiped out because if /etc/ioinit work, this thread WILL fix it.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=72003

SEP

[RAC_1]

What is the exact error message??

What are your settings for npty, nptys, nstrpty and nstrtel kernel values?? Also how exactly you are trying to connect?? Are you trying to telnet/ssh/CDE logins??

Anil

[Uday_S_Ankolekar]

Try this :

1. rmsf /dev/pts/t*
insf -v -d tels

2. For the "telm"-device:

rmsf /dev/telnetm
insf -v -d telm

[john kingsley]

I had this problem before. To fix it, run the following commands:

rm /dev/pts/*
rm /dev/pty/*
cd /dev
insf -e
insf -d telm
insf -d tels

[Prashant Zanwar_4]

Can you provide the screen output what exactly is happening when you do telnet?

You can check for npty and nstrpty kernel values? Increase them if they are real low, this may cause for less number of connections?
Post your output if possible.

Thanks and regards
Prashant

[Prashant Zanwar_4]

yes also check of nstrtel..you will have to rebuild the kernel, so note down the steps you will execute then. Hope it helps

Thanks and regards
Prashant

[Sanjay_6]

Hi,

Take a look at this thread from itrc.

http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000069099180

The itrc doc id is UARPAKBRC00011107.

Hope this helps.

Regds