Terminal 700/96 rest ??

[Maarten van Maanen]

Last night we had a power failure in our area. Our HP9000 systems went down also. Now one of terminals on a D370 does not display any output from the system. I know there is a key-comb that will reset the terminal but I don't know it any more.
Anyone who can help me out with this?

[Alex Glennie]

-power down the console terminal and power up while holding the
D key down for about 5 seconds;
-when you let go of the D key press return and you will see a message displayed indicating that the default configuration is being used.

[Stefan Farrelly]

Press and hold down the D key when you switch the monitor on. Wait 30s or so then release the D key. It should now come on and say reset to Defaults.

[James R. Ferguson]

Hi:

Power off the console and while holding down the "D" key, power it back on. When you hear a beep, the "D"efault settings should be restored.

...JRF...

[Alex Glennie]

3 crowns in a row !..... you must of hit the jackpot on this one ;)

[Paula J Frazer-Campbell]

AND YOUR PRIZE IS:--

AN EVENING OUT WITH :-

Choice 1

Bill Gates

Choice 2

Attila the Hun

Choice 3

Adolf Hitler

;- )

Paula