This question might have been aswered many times but..

[Melkar]

I cant find a thread explaining how to do it.

I have Ux 10.20 I just plugged a USB DVD/CD burner. I did the ioscan and i have the following output:

10 bc I/O Adapter
10/0 ba PCI Bus Bridge - lba
10/0/12/0 lan PCI(10110019) -- Built-in #4
10/0/13/0 audio Built-in Audio
10/0/14/0 ext_bus IDE
10/0/14/0.7 target
10/0/14/0.7.0 ctl Initiator
10/0/14/1 ba PCI Core I/O Adapter
10/0/14/1/1 tty Built-in RS-232C
10/0/14/1/2 tty Built-in RS-232C
10/0/14/1/3 ext_bus Built-in Parallel Interface
10/0/14/2 usb Built-in USB Interface

I believe
10/0/14/2.1 usbhub USB Root Hub
10/0/14/2.1.2 usbdev USB Device
10/0/15/0 ext_bus Ultra Narrow Single-Ended SCSI
10/0/15/0.7 target
10/0/15/0.7.0 ctl Initiator
10/0/15/1 ext_bus Ultra2 Wide LVD SCSI
10/0/15/1.5 target
10/0/15/1.5.0 disk FUJITSU MAJ3091MC
10/0/15/1.6 target
10/0/15/1.6.0 disk FUJITSU MAJ3091MC
10/0/15/1.7 target
10/0/15/1.7.0 ctl Initiator
10/1 ba PCI Bus Bridge - lba
10/4 ba PCI Bus Bridge - lba
10/6 ba PCI Bus Bridge - lba
10/6/2/0 graphics PCI(103c1008) -- 2
32 processor Processor
49 memory Memory



I believe "10/0/14/2.1.2 usbdev is what i need to mount. But i dont find the device in /dev...

[Pete Randall · Accepted solution]

Your problem is that the only USB devices recognized by HP-UX (especially way back in 10.20!) are the keyboard and the mouse.


Pete

[Melkar]

Ok, thanks a lot for the reply.

[florin_10]

Hi,
Did you run an iocan -fn?
florin