HPE Community
Operating System - HP-UX
1855778 Members
2846 Online
104103 Solutions
New Discussion

Thread model in HP-UX

 
SOLVED
Go to solution
VEL_1
Valued Contributor

‎09-15-2005 07:04 PM

‎09-15-2005 07:04 PM

Thread model in HP-UX


Which thread model is used in HP 11i?
0 Kudos
4 REPLIES 4
Arunvijai_4
Honored Contributor

‎09-15-2005 07:05 PM

‎09-15-2005 07:05 PM

Re: Thread model in HP-UX

HP-UX 11i uses MxN threading model.
http://h21007.www2.hp.com/dspp/files/unprotected/hpux/MXN.pdf

-Arun
"A ship in the harbor is safe, but that is not what ships are built for"
0 Kudos
Yogeeraj_1
Honored Contributor

‎09-15-2005 07:23 PM

‎09-15-2005 07:23 PM

Solution

Re: Thread model in HP-UX

hi,

HP-UX supports the three basic thread models: Mx1, 1x1, and MxN.


Note also that, HP-UX releases prior to 11i v1.6 do not support MxN.

also, HP-UX releases prior to 11.0, support only Mx1 threads.

kind regards
yogeeraj
No person was ever honoured for what he received. Honour has been the reward for what he gave (clavin coolidge)
0 Kudos
Mugilvannan
Valued Contributor

‎09-15-2005 08:03 PM

‎09-15-2005 08:03 PM

Re: Thread model in HP-UX

It is using M x N model. You can get informations from,

http://docs.hp.com/en/5965-4642/ch01s07.html

-mugil
If U need a helping hand, U will find one at the end of your arm
0 Kudos
VEL_1
Valued Contributor

‎09-15-2005 08:07 PM

‎09-15-2005 08:07 PM

Re: Thread model in HP-UX

Thanks all.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.