To check persistent binding configured or not in hp-ux 11.23

[mparasur]

Hi,

I want to check persistent binding is configured or not in my hp-ux 11.23 server. It is HP AB465-60001 card. How do I check

Thanks in advance

[Matti_Kurkela]

You must boot the server to EFI command prompt mode to access the EFI-based configuration utility for your HBA.

Attached is the EfiCfg.pdf from the latest firmware package for your HBA. The procedure to access the configuration utility is described on pages 4-5, chapter 3.1.

When you see the Main Menu of the HBA configuration utility, select "Show Database" (option 5). This displays the persistent binding database in the card's NVRAM. If the list is empty, there are no persistent bindings configured.

If this system has persistent bindings and is configured to boot from SAN, you might also want to check the "Edit Boot Settings" section (option 4 in Main Menu).

MK