tusc equivalence for 10.20 multi-proc

[Sockeel]

Hi,

trace doesn't work with multi-processors systems.
tusc works for 11.X

Is there any trace tool for multi-proc 10.20 systems ?

Thanks for answer

[Pete Randall]

I'm sure you've already checked this out, but, just in case - the HP-UX Porting and Archive Centre's version of trace says nothing about single or multi-processor systems:

http://hpux.connect.org.uk/hppd/hpux/Sysadmin/trace-1.6/

Pete

[steven Burgess_2]

Hi

Funny enough I have a similar sort of issue

If you install trace on a multi processor system you get

bad address
KI_TRACE_GET

I raised a software call to see if HP supply a similar tool

nothing

HTH

Steve

[Alex Glennie]

fyi there is a version of trace available for multiple processors but you will have to log a call with HP Support currently to get access to it.

[steven Burgess_2]

Alex

I logged a call today mate

1200934500

Can you sort this for me ?

Thanks

Steve

[Alex Glennie]

Steve B : Answer = yes but not tonight as only sad gits are left in UKRC this time of night : my advise is call the UKRC or email David Newell tomorrow am, the call can easily be re-opened :

ask him to speak to Andy Bennett or myself re the new improved binary .... we can point him in the right direction : as to why I don't just post it as an attachment: no can do sorry support rules .

[Sockeel]

I logged a call yesterday too.
But, HP engineer has never heard of a trace version for multi-proc.
Could you send him reference or access to this version, please ?
Call 1200935646
kamel.bitelmadji@hp.com

I have to fix a critical pb and this version could help me a lot.
Thank you for your cooperation

[steven Burgess_2]

Philippe

Alex is sorting this out for me at the moment

I think you may need to escalate this with your local resource centre

Regards

Steve

[Alex Glennie]

Philippe,

I've sent Kamel the internal URL ... hopefully this will speed things up ...

as to Steve ... turns out I'm talking to a colleague of his about the same problem .... small world.

[Sockeel]

Thanks to Dietmar Konermann (HP Ratingen) for sending to Steven and me version 2.10 of trace which works fine with 10.20 multi-proc.

Thanks again for your kind cooperation

[Chris Bolgrihn]

Does somebody still have a copy or 2.10??

[steven Burgess_2]

Hi Chris

Conincidence or what. Don't get on the forums that much these days.

Yep,

I have a copy, send me your email address and i'll send it through to you

Steve

[Chris Bolgrihn]

Good deal.. my email is chris.bolgrihn@cunamutual.com.

[Chris Bolgrihn]

Any luck with sending the trace program?