Ultrium 460 driver

[Luqman Achmat]

Greetings

I am a newbie to HPUX. Am running HPUX 11.23 (v2) and get the following from an ioscan:

/root>ioscan -fn | grep Ultrium
unknown -1 0/4/1/1.0.0 UNCLAIMED UNKNOWN HP Ultriu
m 2-SCSI
/root>

Where do I obtain the driver for the LTO Ultrium device?

Luq

[Pete Randall]

Luq,

You already should have the driver - it just needs to be included into the kernel. Go into SAM > kernel configuration > drivers and make sure that stape is configured into the kernel.


Pete

[Pete Randall]

Almost forgot - if this is an autochanger, you'll need the schgr driver as well.


Pete