Have an L class server that I am unable to log into that is running 11.0. Can't login over the network or from the console. Had started an fbackup before this all started and everything seems to be hung at this point.
Do you get any message at all, or is it just plain numb? If numb, you're probably going to have to force a reboot, either through the GSP reset function, or through a simulated power failure.
Was able to get into the system after about 5 minutes. System runs fine until I try to do an fbackup then everything hangs. Even running a "who" is taking about 5 minutes to complete. Was looking at system using "top" and the load was around 24 at one point.
You might find some clues in your /var/adm/syslog/syslog.log file. Has this system been running fbackup before without any problems? Has anything changed recently on the system?
Found out that there is a problem with native_th process which is part of sdm. This process is taking up all of the cpu on the system. Hp stated I would need to upgrade to the newest version 1.05 of sdm.
