HPE Community
Operating System - HP-UX
1833554 Members
3644 Online
110061 Solutions
New Discussion

unable to mount var

 
amitv
Occasional Contributor

‎01-05-2006 06:14 PM

‎01-05-2006 06:14 PM

unable to mount var

error
vsfx fsck : file system has I/O errors on meta-data
log replay in process
file system is not clean full fsck required,
0 Kudos
Reply
3 REPLIES 3
RAC_1
Honored Contributor

‎01-05-2006 06:21 PM

‎01-05-2006 06:21 PM

Re: unable to mount var

fsck -F vxfs -o full -y /dev/vgxx/lvolx
to fix it.
There is no substitute to HARDWORK
0 Kudos
Reply
Cem Tugrul
Esteemed Contributor

‎01-05-2006 06:23 PM

‎01-05-2006 06:23 PM

Re: unable to mount var

Amity,

Did you go&try in single-user mode;

When press a key to discontinue appear on screen while rebooting. ( You have 10 sec time for this!)

Interact with IPL respond to "yes".
on ISL prompt type hpux -is
Our greatest duty in this life is to help others. And please, if you can't
0 Kudos
Reply
Devender Khatana
Honored Contributor

‎01-05-2006 06:57 PM

‎01-05-2006 06:57 PM

Re: unable to mount var

Hi,

Try full fsck. If further I/O errors are encounters you might beeven required to replace the disk. A full read test on the LVOL holding the var file system will clarify the disk reliability.

#dd if=/dev/vg00/rlvol?? of=/dev/null bs=1024k

Where rlvol?? is the /var LVOL.

HTH,
Devender
Impossible itself mentions "I m possible"
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.