Operating System - HP-UX
1827399 Members
6069 Online
109965 Solutions
New Discussion

Unable to see fcode version in fmcsutil output

 

Unable to see fcode version in fmcsutil output


Unable to see the FCODE VERSION in any of the below output. Can anyone suggest how to get that ? It is HPUX 11.11

bld00181:ag344q ioscan -fC fc
Class I H/W Path Driver S/W State H/W Type Description
===========================================================================
fc 0 8/0/2/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
fc 1 8/0/3/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
fc 2 8/0/4/1/0/4/0 fcd CLAIMED INTERFACE HP 2Gb PCI/PCI-X Fibre Channel FC/GigE Dual Port Combo Adapter
fc 3 8/0/6/1/0/4/0 fcd CLAIMED INTERFACE HP 2Gb PCI/PCI-X Fibre Channel FC/GigE Dual Port Combo Adapter
fc 4 8/0/9/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
fc 5 8/0/10/1/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channel Mass Storage Adapter
fc 6 8/0/12/1/0/4/0 fcd CLAIMED INTERFACE HP 2Gb PCI/PCI-X Fibre Channel FC/GigE Dual Port Combo Adapter
fc 7 8/0/14/1/0/4/0 fcd CLAIMED INTERFACE HP 2Gb PCI/PCI-X Fibre Channel FC/GigE Dual Port Combo Adapter

bld00181:ag344q fcmsutil /dev/td0

Vendor ID is = 0x00103c
Device ID is = 0x001029
XL2 Chip Revision No is = 2.3
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x00128c
Previous Topology = UNINITIALIZED
Link Speed = UNINITIALIZED
Local N_Port_id is = 0x000000
Local Loop_id is = 126
N_Port Node World Wide Name = 0x50060b0000253925
N_Port Port World Wide Name = 0x50060b0000253924
Driver state = AWAITING_LINK_UP
Hardware Path is = 8/0/2/1/0
Number of Assisted IOs = 0
Number of Active Login Sessions = 0
Dino Present on Card = NO
Maximum Frame Size = 2048
Driver Version = @(#) libtd.a HP Fibre Channel Tachyon TL/TS/XL2 Driver B.11.11.12 PATCH_11.11 (PHSS_31326) /ux/kern/kisu/TL/src/common/wsio/td_glue.c: Sep 5 2005, 10:14:40

bld00181:ag344q fcmsutil /dev/td2 vpd
Error: FCP driver not loaded.

bld00181:ag344q fcmsutil /dev/fcd2

Vendor ID is = 0x001077
Device ID is = 0x002312
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x0012c2
PCI Mode = PCI-X 133 MHz
ISP Code version = 3.2.26
ISP Chip version = 3
Topology = PTTOPT_FABRIC
Link Speed = 1Gb
Local N_Port_id is = 0x612213
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x50060b0000293ce3
N_Port Port World Wide Name = 0x50060b0000293ce2
Switch Port World Wide Name = 0x2022080088a04e06
Switch Node World Wide Name = 0x1000080088a04e06
Driver state = ONLINE
Hardware Path is = 8/0/4/1/0/4/0
Maximum Frame Size = 2048
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx Driver B.11.11.03 /ux/kern/kisu/FCD/src/common/wsio/fcd_init.c:Mar 31 2004,12:14:54

bld00181:ag344q fcmsutil /dev/fcd2 vpd
V I T A L P R O D U C T D A T A
--------- ------------- -------

Product Description : "HP 2Gb Fibre Channel FC/GigE Combo Adapter "

Part number : "A9782-60001"

Engineering Date Code : "A-4411"

Part Serial number : "PR04303N7A"

Misc. Information : "PW=15W;PCI 66MHZ;PCI-X 133MHZ"

Mfd. Date : "4430"

Check Sum : 0x13

EFI version : "001.30"

ROM Firmware version : "003.002.168"

Asset Tag : "NA"

2 REPLIES 2
Matti_Kurkela
Honored Contributor

Re: Unable to see fcode version in fmcsutil output

"FCODE" is a QLogic term that refers to the FibreChannel firmware of the card. The closest match for /dev/fcd2 would be the "ROM Firmware version". If you discard the extra prefix 0's, the version is 3.2.168.

Tachyon cards *don't have* firmware as such: all the functionality that is usually in the FC card firmware is embedded to the PDC firmware of the PA-RISC host system and into the driver instead.

MK
MK
Michael Steele_2
Honored Contributor

Re: Unable to see fcode version in fmcsutil output

Try 'tdutil' instead
Support Fatherhood - Stop Family Law