Operating System - HP-UX
1820592 Members
1917 Online
109626 Solutions
New Discussion юеВ

Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

 
Stuart Abramson
Trusted Contributor

Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

We upgraded our HP-UX "in-place" from 11.11 to 11.23.

Now PowerPath won't work.

The EMC SAC is telling us that the correct procuedure would have been:
1. Uninstall PP 4.3.1.
2. Upgrade.
3. Reinstall PP 4.3.1.

Has anybody done this? Is that how you did it?
10 REPLIES 10
Geoff Wild
Honored Contributor

Re: Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

EMC is correct - you need to re-install PP.

Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
Stuart Abramson
Trusted Contributor

Re: Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

Geoff:

do you mean uninstall it now and reinstall it, or just reinstall it right on top?

Stuart
HGN
Honored Contributor

Re: Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

Hi

The steps mentioned are correct need to uninstall and reinstall.

Rgds

HGN
Stuart Abramson
Trusted Contributor

Re: Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

We tried uninstalling PP on HP-UX 11.23 and that seemed to work. We then installed a new PP 4.3.1 on HP-UX 11.23, and that FAILED. The kernel panics on boot.

Apparently, once you "upgrade-ux", the PowerPath is just irretrievably hosed, and you have to go back to your Ignite Image of HP-UX 11.11, and then:
1. Uninstall PP 4.3.1.
2. Upgrade
3. Reinstall PP 4.3.1.

We're trying that today.
Stuart Abramson
Trusted Contributor

Re: Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

We found a system with hpux 11.11 and NO PowerPath. We upgraded in-place with upgrade-ux and then installed PP 4.3.1. The kernel panics on boot.

Has anyone actually installed PowerPath 4.3.1 on and upgraded HP-UX 11.23?

Or did you install PowerPath 4.3.1 on a "vanilla" HP-UX 11.23?
Stuart Abramson
Trusted Contributor

Re: Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

EMC has told us that there is an error in EMC PP 4.3.1 on HP-UX 11.23 on SOME systems. They advise us to go to EMC PP 4.5, which just came out.
Stuart Abramson
Trusted Contributor

Re: Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

They also gave us a workaround to allow EMC PP 4.3.1 to work properly on 11.23 PA-RISC. If you're interested let me know and I'll send it to you or post it.

Re: Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

Hi Stuart,

I'm interested to know the workaround given by EMC regarding PP431 on HP-UX 11.23. Please send it to ctpestano@smart.com.ph or through this thread.

Will be doing a similar upgrade soon.

Best regards,
Chris
Stuart Abramson
Trusted Contributor

Re: Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

Christian:

The appropriate upgrade path if you are upgrading your HP-UX in-place from 11.11 to 11.23 is:
1. Uninstall PP 4.3.1 from HP-UX. (swremove)
2. Upgrade
3. Install PP 4.5.1

This is essential. The HP Upgrade In-place process doesn't do well with "foreign stuff" in the kernel.

Don't bother with PP 4.3.X. There are problems with 4.3.X on 11.23 (PA-RISC).

Go to PP 4.5.1, which consists of the base 4.5.0 install and a patch to 4.5.1. You can put both PPs in one depot and install with one reboot.

Don't just install 4.5.0. There are problems with HP-UX if you have schgr or ssfrc in your kernel.
Stuart Abramson
Trusted Contributor

Re: Upgrade hpux 11.11 to 11.23 with EMC PowerPath 4.3.1

One more thing: make sure that you download/acquire the PP 4.5.X that is specifically made for 11.23 PA-RISC. There are now multiple PPs for specific HP-UXs.