Upgrade IDS9000 to 2.1

[yc_2]

Hi,

I was asked to upgrade IDS9000 from 2.0 to 2.1.

Should I remove 2.0 using swremove and then install 2.1 ?


Thanks in advance,
YC

[MANOJ SRIVASTAVA]

Hi Leong


This will help you :

http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/displayProductInfo.pl?productNumber=J5083AA


and look for installtion and support buttons a the bottom of the document.


Manoj Srivastava

[Bruce Laughlin]

Hi Leong,

I recently upgraded IDS/9000 from 2.0 to 2.1 on a B1000 running HP-UX 11.00, and had no problems. I did not have to remove 2.0 first. Here's a couple helpful links:

Admin Guide:
http://docs.hp.com/hpux/onlinedocs/J5083-90007/J5083-90007.html

2.1 Release Notes:
http://docs.hp.com/hpux/onlinedocs/J5083-90008/J5083-90008.html

As with any sort of upgrade, make sure you have a backup first, just in case something goes wrong. If nothing else, make sure you back up the IDS stuff under /opt/ids, /var/opt/ids, and /etc/opt/ids.

Regards,
Bruce Laughlin