Upgrading from 10.20 to 11.00, sizing ???

[Scott Dunkley]

Can someone point me in the right direction for finding out the new sizes of VG00 file systems to accomodate hp-ux 11.00 ???

Thanks,

Scott

[Steven Sim Kok Leong]

Hi,

Updating 10.20 to 11.00 sizing requirements can be found at:

http://www.docs.hp.com/hpux/onlinedocs/B2355-90679/00/00/11-con.html

Hope this helps. Regards.

Steven Sim Kok Leong
Brainbench MVP for Unix Admin
http://www.brainbench.com

[John Bolene]

We did not find much increase going from 10.20 to 11.

As you are aware, the big increase was from 9.x to 10.20

The only reason to go to 11 is if you need some of the added functionality or you just have to for other political reasons or if the machine will only work with 11 and above, but then you would not be upgrading anyway.

10.20 will be supported for some time.

[Vincenzo Restuccia]

See http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/5971-0642/5971-0642_top.html&con=/hpux/onlinedocs/5971-0642/00/00/46-con.html&toc=/hpux/onlinedocs/5971-0642/00/00/46-toc.html&searchterms=vg00&queryid=20010420-070132

[Troyan Krastev]

Hi,

Take a look at attached document

HTH
Troyan