Urgent help needs !!!

[hpuxhelp]

Mirror rootvg, and tested it before doing the upgrade on both the primary and secondary. It was done successfully. Do o/s upgrade from 11.0 to 11i, o/s complains about fibercard is not supported for this version. Doing remote upgrade, and as I understand that we can't do a firmware scan on fc to check for the model? Am i right on this? In addition, now try to boot to secondary /mirror disk, can't do so? Should I boot this to single user mode first before multi-user? any suggestion?....

[John Poff]

Hi,

What model of fibre card and what model of HP9000 do you have?

JP

[Anil C. Sedha]

Try booting into single user mode. Mount your filesystems manually.

Try doing a scan or install device drivers.

You can probably use insf -e

check out and let us know


-Anil

[hpuxhelp]

If I did ioscan -fnC fc, will tell me which td is the fibercard is on ? is this correct

[hpuxhelp]

9000/800/N4000-55 : model number
when doing fcmsutil /dev/tdx
doesn't really give me anything in regards to the fibercard adapter model? is there a way to do this without
remove it from the box?

[John Poff]

On most of our fibre cards you can see the model number on the back of the card, if you have physical access to the back of the machine.

JP